Hello,
I just tried to configure my 4960 following the instruction you are recommend on this site but i just get the same error message in the boot log :
tarting Modules...
2000-01-08T01:11:41 : Pwr off/Man reset
All modules successfully started
Config startup-config READ [ OK ]
Config startup-config EXECUTE 2000-01-08T01:11:48 : LOGINFO : Link up on interface ethernet 0 0 0
[FAILED]
2000-01-08T01:11:48 : LOGWARNING : Config: Line 59: SN4960/4E30V(pf-sip)[default]#no autonomous-transitioning
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 107: SN4960/4E30V(if-sip)[IF_SIP_0]#bind gateway GW_SIP_0
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 110: SN4960/4E30V(if-sip)[IF_SIP_0]#service default
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 112: SN4960/4E30V(if-sip)[IF_SIP_0]#remote-party-id called-party
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 117: SN4960/4E30V(if-sip)[IF_SIP_1]#bind gateway GW_SIP_1
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 120: SN4960/4E30V(if-sip)[IF_SIP_1]#service default
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 122: SN4960/4E30V(if-sip)[IF_SIP_1]#remote-party-id called-party
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
2000-01-08T01:11:48 : LOGWARNING : Config: Line 127: SN4960/4E30V(if-sip)[IF_SIP_2]#bind gateway GW_SIP_2
2000-01-08T01:11:48 : LOGWARNING : Config: % ^ Keyword mismatch
Are you sure that you are really generating a configuration file which is compliant with the firmware R5.1 ?
br
Bertrand