Solved Outbound Issues

[smith13045]

So I am new here and trying to get 3cx setup for testing. I am currently having issues with Outbound calls. I have an outbound rule but when I make a call it fails and I have an error in the logs

Cause: 404 No destination/INVITE from

I am using DIDLogic as the SIP Trunk Provider.

Any help will be great.

 

[leejor]

If the message is from your provider (the part you left off...after the from), then, it suggests you are not sending a valid number. Be sure that your rules are correctly striping any access digit(s) you may use.

 

[smith13045]

Call to T:Line:10000>>xxxxxxxxxx@[Dev:sip:[email protected]:5060] from L:18.1[Extn:1005] failed, cause: Cause: 404 No destination/INVITE from 107.6.13.77:5060

So the 107.6.13.77 is my SIP Trunk Provider.

my area code is 503. Should I be doing a 1503 when I dial or just 503?

 

[smith13045]

I got it working. Thanks for your help

 

[YiannisH_3CX]

Glad to see the issue has been resolved. May i ask what the solution was so other users might benefit from your answer?