Outbound through Patton4114

[ayresdj]

Just trying to get outbound calls functioning through the Patton 4114. Incoming calls working great but not really sure where to look with this issue so thought I would post here for opinion.

I have it set up on a very basic dial plan with no digits to strip and have disabled outgoing calls from all but the one line that is connected in the Patton so it forces it to use that. If I have them all enabled for outgoing calls it seems to just try whichever line it feels like so just returns a bad gateway message.

Any thoughts appreciated.

19:56:34.910 [CM503020]: Normal call termination. Reason: Server Failure
19:56:34.910 [CM503016]: Call(14): Attempt to reach "RING GROUP:04*******"<sip:[email protected]> failed. Reason: Server Failure
19:56:34.909 [CM503003]: Call(14): Call to sip:04*******@192.168.1.25:5060 has failed; Cause: 504 Server Time-out; from IP:192.168.1.25:5060
19:56:27.058 Currently active calls - 1: [14]
19:56:23.875 [CM503025]: Call(14): Calling PSTNline:04*******@(Ln.10001@Patton)@[Dev:sip:[email protected]:5060]
19:56:23.831 [CM503004]: Call(14): Route 1: PSTNline:04*******@(Ln.10001@Patton)@[Dev:sip:[email protected]:5060]
19:56:23.830 [CM503010]: Making route(s) to "RING GROUP:04*******"<sip:04*******@192.168.1.210>

 

[netswork]

I would open a ticket with patton on their website. Their response and support is generally very good

 

[craigreilly]

since you only have 1 line - can't you turn the other 3 off in the Patton?

 

[ayresdj]

Yeah I have an open ticket with Patton, have found there support very good so far.

At the moment I am waiting on a reply to a debugging script that I ran for Patton so they can see why the outbound calls are failing. Thankfully I only want outbound to run as a backup if our SIP trunks go down.