Outgoing lines

[George Georgiou]

With 3cx a Patton SmartNode 4960 E1, is there proper configuration, you are able to choose the exact line/port on which you want to dial out.

 

[davidbenwell]

not used this one before, however from my understanding this is what you would need to do.


1. If you have 4 PSTN lines, create 4 separate PSTN gateway links within 3CX
2. Setup each line within the Patton SmartNode 4960 E1 web control pane,l match each 3CX PSTN Gateway extension
3. Create individual outbound rules / inbound rules, to match your requirements for each PSTN extension