Patton 4114 (2 x FXS, 2 x FXO) Configuration

[TechTonic]

I have spent a couple of days on this as although the 4114 is a 3CX supported device, you are on your own if you decide to go with the 2 x FXS, 2 x FXO variant.

As I am sure that others will wish to use this gateway in the future, this thread aims to establish a working config file.

The config below represents my progress to date and is for version 5.3 of the Patton 4114 for UK use. Issues that need to be resolved are:

• The analog phone attached to FXS 0 (97 in the config) does not ring. However, the fxs indicator led on the Patton flashes and when you answer the phone it works perfectly.
• Calls made from FXS 0 (97 in the config) to internal SNOM extensions take around 10 seconds before the extensions ring. Before that you get silence.
• The 'VoIP Link' led on the front panel of the Patton will not go solid. According to the Patton manual its current blinking state indicates an error of some kind.

Any help would be appreciated.

TT

#----------------------------------------------------------------#
# #
# SN4114/2JS2JO/EUI #
# R5.3 2009-03-18 H323 SIP FXS FXO #
# 2009-04-17T16:49:34 #
# SN/00A0BA04678B #
# Generated configuration file #
# #
#----------------------------------------------------------------#

cli version 3.20
clock local offset +01:00
dns-client server 10.0.0.1
webserver port 80 language en
sntp-client
sntp-client server primary 10.0.0.1 port 123 version 4
sntp-client local-clock-offset
system hostname FXOGateway1

system

ic voice 0
low-bitrate-codec g729

profile ppp default

profile call-progress-tone UK_Dialtone
play 1 5000 350 -13 440 -13

profile call-progress-tone UK_Alertingtone
play 1 400 400 0 450 0
pause 2 200
play 3 400 400 0 450 0
pause 4 2000

profile call-progress-tone UK_Busytone
play 1 375 400 0
pause 2 375

profile call-progress-tone UK_CongestionTone
play 1 400 400 -6
pause 2 350
play 3 225 400 0
pause 4 525

profile call-progress-tone UK_SpecialInfoTone
play 1 330 950 0
pause 2 30
play 3 330 1400 0
pause 4 30
play 5 330 1800 0
pause 6 30

profile call-progress-tone UK_WaitingTone
play 1 100 400 0
pause 2 5000

profile call-progress-tone UK_SpecialDialTone
play 1 750 350 0 440 -3
pause 2 750
play 3 750 350 0 440 -3

profile call-progress-tone UK_ReleaseTone
play 1 1500 400 0

profile tone-set default
profile tone-set UK
map call-progress-tone dial-tone UK_Dialtone
map call-progress-tone ringback-tone UK_Alertingtone
map call-progress-tone busy-tone UK_Busytone
map call-progress-tone special-information-tone UK_SpecialInfoTone
map call-progress-tone waiting-tone UK_WaitingTone
map call-progress-tone release-tone UK_ReleaseTone
map call-progress-tone congestion-tone UK_CongestionTone
map call-progress-tone special-dial-tone UK_SpecialDialTone

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g729 rx-length 30 tx-length 30
rtp traffic-class local-default
dejitter-mode static-data
fax transmission 1 bypass g711ulaw64k
fax transmission 2 bypass g711alaw64k
fax transmission 3 relay t38-udp
fax redundancy low-speed 2 high-speed 4
no fax error-correction
no fax hdlc
fax max-bit-rate 9600
no fax ced-retransmission
fax bypass-method v150-vbd
modem transmission 1 bypass g711alaw64k
modem transmission 2 bypass g711ulaw64k
modem bypass-method v150-vbd

profile pstn default

profile ringing-cadence default
play 1 1000
pause 2 4000

profile ringing-cadence UK
play 1 400
pause 2 200
play 3 400
pause 4 2000

profile sip default

profile aaa default
method 1 local
method 2 none

context ip router

interface IF_IP_LAN
ipaddress 10.0.0.253 255.255.255.0
no napt-inside
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context cs switch
no digit-collection timeout

routing-table called-e164 Table1
route .%T dest-interface IF_SIP_2

routing-table called-e164 Table2
route .%T dest-interface IF_SIP_3

interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0
route call dest-interface IF_FXO_0
remote 10.0.0.4
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none
use profile tone-set UK

interface sip IF_SIP_1
bind context sip-gateway GW_SIP_1
route call dest-interface IF_FXO_1
remote 10.0.0.4
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10002 host-part to-header target-param none
use profile tone-set UK

interface sip IF_SIP_2
bind context sip-gateway GW_SIP_2
route call dest-interface IF_FXS_0
remote 10.0.0.4
early-connect
early-disconnect
address-translation outgoing-call from-header user-part fix 97 host-part fix 10.0.0.4
use profile tone-set UK

interface sip IF_SIP_3
bind context sip-gateway GW_SIP_3
route call dest-interface IF_FXS_1
remote 10.0.0.4
early-connect
early-disconnect
address-translation outgoing-call from-header user-part fix 96 host-part fix 10.0.0.4
use profile tone-set UK

interface fxs IF_FXS_0
route call dest-table Table1
no call-hold
no call-waiting
caller-id-presentation pre-ring
subscriber-number 97
use profile tone-set UK
use profile ringing-cadence UK

interface fxs IF_FXS_1
route call dest-table Table2
no call-hold
no call-waiting
caller-id-presentation pre-ring
use profile tone-set UK
use profile ringing-cadence UK

interface fxo IF_FXO_0
route call dest-interface IF_SIP_0
loop-break-duration min 80 max 240
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
dial-after timeout 1
mute-dialing
use profile tone-set UK

interface fxo IF_FXO_1
route call dest-interface IF_SIP_1
loop-break-duration min 80 max 240
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
dial-after timeout 1
mute-dialing
use profile tone-set UK

context cs switch
no shutdown

authentication-service AS_ALL_LINES
realm 1 3CXPhoneSystem
username 10001 password 11111111111= encrypted
username 10002 password 22222222222= encrypted
username 96 password 96969696969= encrypted
username 97 password 97979797979= encrypted

location-service LS_10001
domain 1 10.0.0.4

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10001

identity 10001

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 10.0.0.4
lifetime 300
register auto

location-service LS_10002
domain 1 10.0.0.4

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10002

identity 10002

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 10.0.0.4
lifetime 300
register auto

location-service LS_10003
domain 1 10.0.0.4

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 97

identity 97

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 10.0.0.4
lifetime 3600
register auto
retry-timeout on-system-error 10
retry-timeout on-client-error 10
retry-timeout on-server-error 10

location-service LS_10004
domain 1 10.0.0.4

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 96

identity 96

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 10.0.0.4
lifetime 3600
register auto
retry-timeout on-system-error 10
retry-timeout on-client-error 10
retry-timeout on-server-error 10

context sip-gateway GW_SIP_0

interface LAN
bind interface IF_IP_LAN context router port 5060

context sip-gateway GW_SIP_0
bind location-service LS_10001
no shutdown

context sip-gateway GW_SIP_1

interface LAN
bind interface IF_IP_LAN context router port 5062

context sip-gateway GW_SIP_1
bind location-service LS_10002
no shutdown

context sip-gateway GW_SIP_2

interface LAN
bind interface IF_IP_LAN context router port 5064

context sip-gateway GW_SIP_2
bind location-service LS_10003
no shutdown

context sip-gateway GW_SIP_3

interface LAN
bind interface IF_IP_LAN context router port 5066

context sip-gateway GW_SIP_3
bind location-service LS_10004
no shutdown

port ethernet 0 0
medium 100 full
encapsulation ip
bind interface IF_IP_LAN router
no shutdown

port fxs 0 0
use profile fxs gb
encapsulation cc-fxs
bind interface IF_FXS_0 switch
no shutdown

port fxs 0 1
use profile fxs gb
encapsulation cc-fxs
bind interface IF_FXS_1 switch
no shutdown

port fxo 0 0
use profile fxo gb
encapsulation cc-fxo
bind interface IF_FXO_0 switch
no shutdown

port fxo 0 1
use profile fxo gb
encapsulation cc-fxo
bind interface IF_FXO_1 switch
no shutdown

 

[TelicaIT]

Hi There,

I know its a bit of a late reply but I have just used your config on a customer 4114 using Firmware v5.3.

Everything is working fine subject to customer testing (I did it remotely) so will report back if I do or do not have the issues you stated.

The only problem I had that I thought I would let you know about was that on the line abot "fax Max-bit-rate 9600" a telnet session to the Patton shows a config error on that line saying 15500 is not an option so I had to manually set it through the Web page and even the exported config file shows the same as yours so not too sure what is happening there!!!

I now have the following Errors on startup through a terminal session so will report back if I resolve these:

LOGERROR : DSP: ADDING 2250Hz TONE FAILED - MAX NUMBER OF SIGNALS REACHED
1970-01-01T01:00:56 : LOGERROR : DSP: ADDING 1100Hz TONE FAILED - MAX NUMBER O
F SIGNALS REACHED
1970-01-01T01:00:57 : LOGERROR : DSP: ADDING 2250Hz TONE FAILED - MAX NUMBER O
F SIGNALS REACHED
1970-01-01T01:00:57 : LOGERROR : DSP: ADDING 1100Hz TONE FAILED - MAX NUMBER O
F SIGNALS REACHED

Regards

Steve

 

[leejor]

I noticed that there is one parameter:

context cs switch
no digit-collection timeout

Can you put a value in here? Say, 3 or 4 seconds, so that a dialed number will "go out" 3 or 4 seconds after the last digit is dialled? Perhaps the default is to wait for 10 or 15 seconds.

 

[STCJeff]

I have the 4 FXO version, but the timeout should work the same. You can indeed put in a digit-collection timeout value (we're using 3 seconds) and it will speed up outgoing dialing. You also can use a digit collection terminator (such as the pound sign) so that when you hit that button the Patton dials immediately rather than waiting for the timeout counter to finish.

 

[jfurmanek]

Many Thanks for the config file.

I have successfully adapted it for a Patton 4118 FXS gateway, I would not have been able to do this without your master template !.

So please let me know if anyone needs a copy of mine.

Cheers

John
[email protected]

 

[ciscorusty]

Hi John,

The 4118 you got working was that a 4 x FX0 and 4 X FXS configuration? If so I would love to have a look at the config.

Thanks,
Russell.

 

[Denis Lamothe]

I also have a Patton 4118 with 4x FXO and 4x FXS ports, that i would like to configure to use at least 2 FXO and 2 FXS at the same time. Anyone that could help out... that would be awesome!