I am implementing 3CX for a client using ISDN BRI lines with a Patton Smartnode gateway.
I have found that if these gateways are connected to the network, but not powered, they seem to be generating a large amount of noise on the network. So much so, that it results in an average 50% dropped packet rate.
I was curious to know if anyone else has been experiencing similar problems?
I have found that if these gateways are connected to the network, but not powered, they seem to be generating a large amount of noise on the network. So much so, that it results in an average 50% dropped packet rate.
I was curious to know if anyone else has been experiencing similar problems?
