PHONE IS NOT MAKING OUTBOUND OR INBOUND CALLS!!

[apal1990]

hey everyone, i am farily new to VOIP it self, but i have set up both the gateway which is a linksys 3102 and the 2 ip phones which are Aastra 33i's. Now when i try to place a call the call fails every single time. the same with recieveing calls, i call my work number and all of the original phones ring but not my ip phones.
I have upadate the firware
i have version 6.0 of 3cx
the aastra 33i are connected and registered, but say idle in quotes the same with my linksys. the light is green but the phone line is not active at all.
this is what the server status emits when i try to place the call:

09:18:55.468 Call::Terminate [CM503008]: Call(60): Call is terminated
09:18:55.421 Call::RouteFailed [CM503015]: Call(60): Attempt to reach "98323382326"[sip:[email protected]:5060] failed. Reason: Not Found
09:18:55.421 CallLeg:nFailure [CM503003]: Call(60): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:10.10.10.211:5060
09:18:55.359 CallCtrl:nSelectRouteReq [CM503004]: Call(60): Calling: PSTNline:8323382326@(Ln.10000@Line 1)@[Dev:sip:[email protected]:5060]
09:18:55.359 CallCtrl:nSelectRouteReq [CM503010]: Making route(s) to "98323382326"[sip:[email protected]:5060]
09:18:55.343 Extension:rintEndpointInfo [CM505001]: Ext.100: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Aastra 33i/2.1.0.2145] Transport: [sip:10.10.10.210:5060]
09:18:55.312 CallCtrl:nIncomingCall [CM503001]: Call(60): Incoming call from Ext.100 to "98323382326"[sip:[email protected]:5060

any help would be greatly appreciated.
can someone please help me make sense of this!!???

much love,
andy p

 

[SIPfun]

Do you have an outgoing connection to the outside world? (VOIP/PSTN)?

Do you have a rule setup to handle your outgoing calls?

 

[Henk]

09:18:55.468 Call::Terminate [CM503008]: Call(60): Call is terminated
09:18:55.421 Call::RouteFailed [CM503015]: Call(60): Attempt to reach "98323382326"[sip:[email protected]:5060] failed. Reason: Not Found
09:18:55.421 CallLeg:nFailure [CM503003]: Call(60): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:10.10.10.211:5060
09:18:55.359 CallCtrl:nSelectRouteReq [CM503004]: Call(60): Calling: PSTNline:8323382326@(Ln.10000@Line 1)@[Dev:sip:[email protected]:5060]
09:18:55.359 CallCtrl:nSelectRouteReq [CM503010]: Making route(s) to "98323382326"[sip:[email protected]:5060]
09:18:55.343 Extension:rintEndpointInfo [CM505001]: Ext.100: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Aastra 33i/2.1.0.2145] Transport: [sip:10.10.10.210:5060]
09:18:55.312 CallCtrl:nIncomingCall [CM503001]: Call(60): Incoming call from Ext.100 to "98323382326"[sip:[email protected]:5060

make sure your route is configured, with that I mean:

Your Aastra appears to have some issues
9:18:55.343 Extension:rintEndpointInfo [CM505001]: Ext.100: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Aastra 33i/2.1.0.2145] Transport: [sip:10.10.10.210:5060]

Does not seem to be able what to do eg not registered, are all your lines nice and "green" ?

09:18:55.421 CallLeg:nFailure [CM503003]: Call(60): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:10.10.10.211:5060

 

[Anonymous]

The technical support requesting here goes beyond that we can provide in the free peer-peer forums and would require finite trouble-shooting of your specific installation which we would normally do via our Support Portal at http://support.3cx.com .

We suggest that for a little amount of money we could give you this full support or provide you with feasible alternative solutions.

This can start from a Small Business Edition with 8 simultaneous calls and Support Contract going at Eur 375 + Eur 125 per year. We also recommend version upgrade insurance at Eur 99 per year. We can also propose larger licenses as you desire and you can eventually perform Edition Upgrades as your needs grow.

If you have any further queries about this or how to proceed, please contact [email protected] .

Thanks,