Portech re register invalid-Solved

[amygoda]

Hello,
after receiving a call poretech mv-374 reregister with the called number not with the port number
so it shown unregistered
port = 80861
caller id = 01122005555

19-Oct-2013 16:34:29.196 [CM102001]: Authentication failed for AuthFail Recv Req REGISTER from 172.17.99.231:5064 tid=759368d9f4 [email protected]:
REGISTER sip:172.17.99.201 SIP/2.0
Via: SIP/2.0/UDP 172.17.99.231:5064;rport=5064;branch=z9hG4bK759368d9f4
Max-Forwards: 70
Contact: <sip:[email protected]:5064>
To: "80861"<sip:[email protected]>
From: "80861"<sip:[email protected]>;tag=722a3051
Call-ID: [email protected]
CSeq: 5 REGISTER
Expires: 60
Allow: INVITE, CANCEL, ACK, BYE, NOTIFY, REFER, OPTIONS, INFO, MESSAGE, UPDATE
Proxy-Authorization: Digest username="80861",realm="3CXPhoneSystem",nonce="414d535c0873297555:bdabc19d7417d6b30f6208273d1621af",response="0ba01a73099a5f8064adcbe1c2e67450",uri="sip:172.17.99.201",algorithm=MD5
Supported: Replaces
User-Agent: Mv-37x (1008030)
Content-Length: 0

 

[amygoda]

Hello,
I solved it
The guide is wrong
in Mobile - settings
leave sip from as it tel/user Standard
or tel/tel (not std)

 

[complex1]

Hi,

The guide is wrong

Which guide?
I have setup my Portech as described in the guide provided by 3CX and there is nothing wrong with it.
http://www.3cx.com/blog/voip-howto/gsm-mobile-gateway/ (see Mobile Setting)

 

[amygoda]

Hi,
your link is for MV-370 or MV-372 and Mobile settings are right in it
but the guide for MV-374 wrong in mobile settings

also does not show how to choose specified line or port for outgoing call

 

[complex1]

Hi,

Sorry, didn’t know there was a howto guide for the Portech MV374 too.

also does not show how to choose specified line or port for outgoing call

In the guide you can read under “Service Domain Settings”
- Repeat the process for each SIM Card slot which is in use (selecting “Mobile 2″, “Mobile 3″, or “Mobile 4″ as required)
- Configuring the settings for each SIM Card Slot NOT IN USE
Thus each Realm have his own Port Number.

You are right about the wrong “Mobile Settings”, the setting in other guide are better.

 

[amygoda]

Hello FranK,
3CX server dealing with mv -372 as it is 2 MV-370 each device has port and seperate outbound rule
If you choose MV-374 in 3CX server settings
It will give you 1 device with 4 ports and 1 outbound rule
I Know If I configured it as 4 MV-370 it will work
but I'll lose round for out calls for the ports

Best regards
A.Goda