Power Went Out And Now Server Won't Work

[refiking]

The power went out for about 20 - 30 seconds earlier and now when I restarted the computer, the 3cx server won't register the line. Thus, I'm offline. Here's the server log. Please help!

14:31:48.039 CallCtrl::thread [CM501008]: *** Stopped Calls Controller thread ***
14:31:45.025 CServiceModule:reMessageLoop [CM100001]: *!* Failed to initialize Call Manager *!*
14:31:45.025 CallMgr::Initialize [CM100001]: *!* Failed to initialize SIP Stack *!*
14:31:39.978 CallMgr::findLocalIPs [CM101001]: Can not determine any local IP Address!
14:31:39.808 MediaServerConnected [CM112000] Media Server is connected
14:31:39.287 CallCtrl::thread [CM501007]: *** Started Calls Controller thread ***
14:31:39.287 CallMgr::Initialize [CM501002]: Version: 6.0.650.0
14:31:39.287 CallMgr::Initialize [CM501001]: Start 3CX PhoneSystem Call Manager
14:31:38.886 LoadLicenceInfo [CM501010]: License Info: Load Failed

 

[avraam_mich]

Hi

please try to make another rebbot of the machine where 3cx is installed. If possible make it a cold reboot (shutdown and restart after 10 seconds)

After restarting see if the lines get registered.

regards

 

[SIPfun]

Check your network gear too... Sometimes power blips hang them up. A power reset of those may help as well.

 

[galal202]

Hi,
I think it's better to reinstall 3cx specialy if you have a backup

 

[refiking]

You guys are right. I just reinstalled a fresh copy and backed up the old copy so everything is back up and running. Thanks!