Toggle sidebar Toggle sidebar

Problem add DDI

Status
Not open for further replies.

clavaud

Joined
Jun 27, 2007
Messages
24
Reaction score
0
In version 5.1.4510.0
The numbers DDI does not functioning

14:53:09.531 AuthMgr::onAuthFailure [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=4cc7f49d9 cseq=INVITE [email protected]:5060 / 868561890 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings

14:53:09.218 evt::CheckAuth::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK4cc7f49d9
Max-Forwards: 70
Route: [sip:192.168.1.11;lr]
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]]
From: [sip:[email protected]];tag=9f06bdcea67336e
Call-ID: [email protected]
CSeq: 868561890 INVITE
Proxy-Authorization: Digest response="31a4586ffdc6a7e7c31bd9445e688d82",username="1234",realm="3CXPhoneSystem",nonce="12854811189:0de2bf74b5e3c629322bad84b7147de1",algorithm=MD5,uri="sip:[email protected]"
Supported: timer, replaces
User-Agent: Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP
Content-Length: 0


14:53:09.218 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: INVITE [email protected] tid=4cc7f49d9 cseq=INVITE [email protected]:5060 / 868561890 from(wire)

14:53:08.859 evt::CheckIfAuthIsRequired::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bKa7069f195
Max-Forwards: 70
Route: [sip:192.168.1.11;lr]
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]]
From: [sip:[email protected]];tag=9f06bdcea67336e
Call-ID: [email protected]
CSeq: 868561889 INVITE
Supported: timer, replaces
User-Agent: Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP
Content-Length: 0


14:53:08.859 evt::CheckIfAuthIsRequired::not_handled [CM302001]: Authorization system can not identify source of: SipReq: INVITE [email protected] tid=a7069f195 cseq=INVITE [email protected]:5060 / 868561889 from(wire)

Snippet file programming
- <row>
<field name="idgateway">2</field>
<field name="name">patton</field>
<field name="model">patton-sn-4552.gw.xml</field>
<field name="host">192.168.1.1</field>
<field name="vpnip" />
<field name="port">5060</field>
<field name="maxlines">1</field>
<field name="outcid" />
<field name="invitewithreplace">1</field>
<field name="useipincontact">0</field>
<field name="calleridin">0</field>
<field name="linetype">0</field>
<field name="lineidin">0</field>
<field name="callednumberin">0</field>
<field name="destnumberin">1</field>
<field name="destnumberin_to">1</field>
<field name="destnumberin_reqlineuri">1</field>
<field name="destnumberin_rpid_called">1</field>
<field name="isinternal">1</field>
<field name="isbindtoms">0</field>
<field name="issupportreinvite">0</field>
<field name="issupportreplaces">0</field>
<field name="requireauthfor">4</field>
<field name="ipincontactreg">0</field>
<field name="specregip" />
<field name="usecontactfield">0</field>
<field name="gatewaytype">0</field>
<field name="usevpn">0</field>
<field name="mathstrategy">2</field>
<field name="source1_fkidgwpar">6</field>
<field name="source1_fkidgwparvalue">2</field>
<field name="source1_customvalue" />
<field name="source2_fkidgwpar" />
<field name="source2_fkidgwparvalue" />
<field name="source2_customvalue" />
<field name="source3_fkidgwpar" />
<field name="source3_fkidgwparvalue" />
<field name="source3_customvalue" />
<field name="toneset" />
</row

- <table name="inboundruledid">
- <row>
<field name="idinboundruledid">8</field>
<field name="inputmask">3611</field>
<field name="name">sda3611</field>
<field name="overrideincoming">1</field>
<field name="fkidgateway">2</field>
<field name="fkiddnrouteto">4</field>
<field name="fkiddnroutetoooh">4</field>
<field name="routetotype">0</field>
<field name="routetoout" />
<field name="routetooohtype">0</field>
<field name="routetooohout" />
<field name="faxbehaviour">1</field>
<field name="fkidfaxdn">2</field>
</row

- <row>
<field name="idexternalline">2</field>
<field name="fkidgateway">2</field>
<field name="fkidinboundrule">3</field>
<field name="fkiddn">6</field>
<field name="authid">1234</field>
<field name="authpswd">1234</field>
<field name="linenumber">3610</field>
<field name="outcid">3610</field>
<field name="direction">3</field>
<field name="maxcalls">2</field>
<field name="faxbehaviour">1</field>
<field name="fkidfaxdn">2</field>
</row>
 
Problem is not related to DDI. PBX can not identify source of the call.
What is 1001 in From and Contact headers?
 
The same applelant 1001 to 3610 line running (without the use DDI)

16:00:36.359 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100
16:00:28.093 CallCtrl::onSelectRouteReq [CM503004]: Call(106): Calling: Ext:100@[Dev:sip:[email protected]:2060;line=odob66nr]
16:00:28.093 Line::printEndpointInfo [CM505002]: Gateway:[patton] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP] Transport: [sip:192.168.1.11:5060]
16:00:28.093 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100
16:00:28.078 CallCtrl::onIncomingCall [CM503001]: Call(106): Incoming call from 1001@(Ln.10001@patton) to [sip:[email protected]:5060]
16:00:28.078 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100
 
Probably you didn't notice the difference: your Patton sends 1001 (two zeroes) in Contact, and PBX expects 10001 (three zeroes). As soon as Patton will provide 10001 in Contact - all will work immediately.
 
In your manual, you explain the following paragraph

3. Now analyze the “To” header carefully and ensure that the DID number you have
dialled is present in the “To” header: <sip:789456123@3CXPhone System>.
3CX Phone System for Windows System for Windows http://www.3cx.com
Page 50
4. If the DID number is not present in the “To” header, you will have to check the
documentation of your VOIP Gateway to find how you can configure it to insert the
DID number into the “To” field. In the case of a VOIP Provider, contact your VOIP
provider for more information.
5. If the DID number is present in the “To” header, check whether the string listed in the
“To” field matches the string you configured in the rule. Adjust accordingly and try
again
Why you give me the information from?
 
I have the same problem on a line VOIP

State server; Call OK (without DDI)

16:49:32.953 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10000 forwards to DN:100
16:49:26.937 CallCtrl::onSelectRouteReq [CM503004]: Call(107): Calling: Ext:100@[Dev:sip:[email protected]:2060;line=odob66nr]
16:49:26.921 Line::printEndpointInfo [CM505003]: Provider:[telecom] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Epygi Quadro SIP User Agent/v4.1.52 (QUADRO-ISDN)] Transport: [sip:192.168.1.11:5060]
16:49:26.921 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10000 forwards to DN:100
16:49:26.906 CallCtrl::onIncomingCall [CM503001]: Call(107): Incoming call from 1001@(Ln.10000@telecom) to [sip:[email protected]:5060]
16:49:26.796 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10000 forwards to DN:100


State server; Call not OK with DDI 0870

:11:15.343 AuthMgr::onAuthFailure [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=2ef36d25c8b57bac.1 cseq=INVITE [email protected]:5060 / 144 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
17:11:15.031 evt::CheckAuth::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 17.150.0.14:5060;branch=z9hG4bK2ef36d25c8b57bac.1
Via: SIP/2.0/UDP 17.150.0.50:5060;rport=5060;branch=z9hG4bKEPSVBUS2b6fdf20-3d0b-4a96-9704-b89b13fe4f47
Max-Forwards: 69
Record-Route: [sip:17.150.0.14:5060;lr]
Contact: "PSTN-1001"[sip:[email protected]:5060]
To: [sip:[email protected]]
From: "PSTN-1001"[sip:[email protected]];tag=120663604903a7a386-1d44-433b-94a2-088320032670
Call-ID: 10265525888703691_f28c8ce7-62f3-41cf-92 ... config.com
CSeq: 144 INVITE
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, UPDATE
Proxy-Authorization: Digest realm="3CXPhoneSystem",nonce="12854819474:5d48ff22c076e8c9a9045ac11f438a23",username="1001",uri="sip:[email protected]",algorithm=MD5,response="e909965797a0184f961af1989bc89094"
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v4.1.52 (QUADRO-ISDN)
Content-Length: 0


17:11:15.031 evt::CheckAuth::not_handled [CM302002]: Authentication failed due to unidentified source of: SipReq: INVITE [email protected] tid=2ef36d25c8b57bac.1 cseq=INVITE [email protected]:5060 / 144 from(wire)
17:11:14.609 evt::CheckIfAuthIsRequired::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 17.150.0.14:5060;branch=z9hG4bK8b0f017d480e0bac.1
Via: SIP/2.0/UDP 17.150.0.50:5060;rport=5060;branch=z9hG4bKEPSVBUSbe896f38-31c5-4a89-b1ed-7a5df24acddb
Max-Forwards: 69
Record-Route: [sip:17.150.0.14:5060;lr]
Contact: "PSTN-1001"[sip:[email protected]:5060]
To: [sip:[email protected]]
From: "PSTN-1001"[sip:[email protected]];tag=120663604903a7a386-1d44-433b-94a2-088320032670
Call-ID: 10265525888703691_f28c8ce7-62f3-41cf-92 ... config.com
CSeq: 143 INVITE
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, UPDATE
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v4.1.52 (QUADRO-ISDN)
Content-Length: 0
 
As I have already explained you have problem with source identification, NOT DDI. So if you want your system to work - you can do what I've said. Reading manual on DID will not help you this time.
 
I have the same problem while sources are identical (3600)

Call Ok (without the use DDI)

17:30:04.203 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100
17:29:56.859 CallCtrl::onSelectRouteReq [CM503004]: Call(111): Calling: Ext:100@[Dev:sip:[email protected]:2060;line=odob66nr]
17:29:56.859 Line::printEndpointInfo [CM505002]: Gateway:[patton] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP] Transport: [sip:192.168.1.11:5060]
17:29:56.859 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100
17:29:56.843 CallCtrl::onIncomingCall [CM503001]: Call(111): Incoming call from 3600@(Ln.10001@patton) to [sip:[email protected]:5060]
17:29:56.843 LineCfg::getInboundTarget [CM503011]: Inbound out-of-office hours' rule for LN:10001 forwards to DN:100

Call not 0k with DDI 3611 (same source 3600)
17:23:33.953 AuthMgr::onAuthFailure [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=d342067e0 cseq=INVITE [email protected]:5060 / 1821490199 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
17:23:33.640 evt::CheckAuth::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bKd342067e0
Max-Forwards: 70
Route: [sip:192.168.1.11;lr]
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]]
From: [sip:[email protected]];tag=4953dabd24b6d42
Call-ID: [email protected]
CSeq: 1821490199 INVITE
Proxy-Authorization: Digest response="86cad699a2a17ad44e642179e9175f09",username="1234",realm="3CXPhoneSystem",nonce="12854820213:34f7e1a4c8710de0fa659bf4fc8c502d",algorithm=MD5,uri="sip:[email protected]"
Supported: timer, replaces
User-Agent: Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP
Content-Length: 0




17:23:33.953 AuthMgr::onAuthFailure [CM102001]: Authentication failed for SipReq: INVITE [email protected] tid=d342067e0 cseq=INVITE [email protected]:5060 / 1821490199 from(wire); Reason: Credentials don't match, check that authorization-ID and password match the ones in extension settings
17:23:33.640 evt::CheckAuth::not_handled [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bKd342067e0
Max-Forwards: 70
Route: [sip:192.168.1.11;lr]
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]]
From: [sip:[email protected]];tag=4953dabd24b6d42
Call-ID: [email protected]
CSeq: 1821490199 INVITE
Proxy-Authorization: Digest response="86cad699a2a17ad44e642179e9175f09",username="1234",realm="3CXPhoneSystem",nonce="12854820213:34f7e1a4c8710de0fa659bf4fc8c502d",algorithm=MD5,uri="sip:[email protected]"
Supported: timer, replaces
User-Agent: Patton SN4562 2BIS EUI MxSF v3.2.8.45 00A0BA0361E4 R4.2 2007-09-19 SIP
Content-Length: 0
 
No solutions to my problem?
 
You can check the FAQ on how to configure custom providers. Other then that you will need to log a support request - this requires technical support.
 
Hi,
as I can see, you use a Patton connected to the 3cx Box.
I had the same issue.

The problem is,that the 3cx doesnt recognize your Patton as "a friend".

Please try the following:
Go to Lines, Mangage, Manage Gateways & Providers, select your Patton and choose Edit Selected.
Under Source Identification check Match Any Fields.
Under SIP Field choose Contact: Host Part.
Under Value choose Custom Field.
Under Custom Value enter 192.168.1.1

For me this worked fine.
 
Hi clavaud ,

lol @ "No solutions to my problem?" when archie has highlighted the exact problem!

Have a second look at those SIP messages:

The working INVITES read:
"Incoming call from 3600@(Ln.10001@patton) to ..."
i.e. your line is 10001 . Note x3 0s in 10001 .

The non working INVITES read:
INVITE sip:[email protected] SIP/2.0
Contact: "PSTN-1001"[sip:[email protected]:5060]


The PBX gets a message, reads it and tries to figure out who this is for. The PBX sees users 0870 (INVITE header) or 1001 (Contact header) in the message. At this point the PBX is baffled, it has no such users so it just discards the message. An decent analogy is a mailserver receiving a mail for [email protected] when there simply is no such user.

You need to sort out the messages that the PATTON is spitting out. You are however in luck, the 3CX team have good PATTON documentation/integration I am sure you can sort it all out if you carefully have a second look at the PATTON configuration guide. It's tricky and probably all new, so patience is required! Give it another read and I am sure you will have success.
 
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
111,891
Messages
589,590
Members
164,758
Latest member
rmf
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom