problem making outbound calls

[Tony Ng]

Hi!

I am trying to get 3CX up and running with the few Avaya 1140e SIP phones.

3CX recognize the 1140E's and i am able to set and extension on each sets.I also got the 3CX phone working as well as my iphone with the 3CX app.

Now my problem is the 3CX can call the 1140e's i can pick up and talk but when i use the 1140e's to dial out to the 3CX phone on the computer it says (call denied,prohibited).

My 1140e's can receive calls but they cant dial.

I hope someone can help me out.

Thank you!

 

[leejor]

Could you post one of the 3CX server logs of a call?

Are these sets located on the same LAN as the server?

 

[Tony Ng]

Could you post one of the 3CX server logs of a call?

Are these sets located on the same LAN as the server?

Hi!

All the sets are on the same LAN.
I am not sure if this is the log you are looking for but here it is.

05-Mar-2015 19:47:43.635 Leg L:107.1[Unknown:] is terminated: Cause: BYE from PBX
05-Mar-2015 19:47:43.584 [CM502001]: Source info: From: <sip:[email protected]>;tag=83638dff87; To: <sip:[email protected]>
05-Mar-2015 19:47:43.584 [CM503013]: Call(C:107): Incoming call rejected, caller is unknown; msg=Ivite-IN Recv Req INVITE from 192.168.1.120:5060 tid=0dc33c2dafb7910b0 Call-ID=3df62c61af2fdbc4:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.120:5060;branch=z9hG4bK0dc33c2dafb7910b0
Max-Forwards: 70
Contact: <sip:[email protected]>
To: <sip:[email protected]>
From: <sip:[email protected]>;tag=83638dff87
Call-ID: 3df62c61af2fdbc4
CSeq: 21897 INVITE
Expires: 180
Session-Expires: 1800
Min-SE: 1800
Accept: application/sdp
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, REFER, INFO, MESSAGE, NOTIFY, UPDATE
Content-Type: application/sdp
Proxy-Authorization: Digest username="105",realm="3CXPhoneSystem",nonce="414d535c0b098a2f60:cb80832bc6710309f24db8388ef0a436",uri="sip:[email protected]",response="5aaaf4ef2f7545d238a7c0db5c93829c",algorithm=MD5
Supported: timer, replaces
User-Agent: Avaya IP Phone 1140E (SIP1140e.04.03.12.00)
Allow-Events: talk, hold
Content-Length: 299
Remote-Party-ID: <sip:[email protected]>;screen=yes;party=calling;privacy=off
x-nt-GUID: 0016CA00FCF2

 

[leejor]

Being all on the same LAN I would not expect to see domain names...

To: <sip:103@avaya.com>
From: <sip:105@avaya.com>;tag=83638dff87

If you are actually using them in the datafill of the set, then that same Domain Name must be datafilled in the 3CX Server as well (it's in the advanced settings), or the call will be rejected for security reasons. This will usually only affect only calls from sets outside the LAN, as that is normally when one would normally expect to see it. Any internal set should be using the local IP of the server, unless you have some reason not to.

 

[Tony Ng]

Being all on the same LAN I would not expect to see domain names...

To: <sip:103@avaya.com>
From: <sip:105@avaya.com>;tag=83638dff87

If you are actually using them in the datafill of the set, then that same Domain Name must be datafilled in the 3CX Server as well (it's in the advanced settings), or the call will be rejected for security reasons. This will usually only affect only calls from sets outside the LAN, as that is normally when one would normally expect to see it. Any internal set should be using the local IP of the server, unless you have some reason not to.

Thank you so much for the help!! I finally got the sets to work. Have a nice day!