Problems with TLS

[OlegDenisishin]

Hello.

I'm evaluating 3CX Phone System and 3CX Softphone for Windows. I'm trying to setup TLS but it doesn't work. I've followed instructions from http://www.3cx.com/blog/voip-howto/secure-sip/ but server reports in its log:

21:39:10.406 Exception thrown from Transportprocess: SecurityException getDomainCert failed @ .\ssl\TlsConnection.cxx:87
21:39:10.406 Don't have certificate for domain 192.168.0.100

Details about server configuration:
Windows Server 2003, 3CX Phone System 10

Does anybody know how I can solve the problem?

 

[SY]

On PBX side, you need to install certificate signed by the CA which is installed on the phone side as a trusted one.
The certificate should be issued for the domain (IP address) of the PBX.

P.S. please don't duplicate your message.
http://www.3cx.com/forums/forum-rules-read-to-get-answers-93.html
http://www.3cx.com/forums/pravila-foruma-kak-sokratit-vremja-mezhdu-voprosom-i-otvetom-18715.html

 

[melody0201]

On PBX side, you need to install certificate signed by the CA which is installed on the phone side as a trusted one.
The certificate should be issued for the domain (IP address) of the PBX.

P.S. please don't duplicate your message.
http://www.3cx.com/forums/forum-rules-read-to-get-answers-93.html
http://www.3cx.com/forums/pravila-foruma-kak-sokratit-vremja-mezhdu-voprosom-i-otvetom-18715.html

Hello All;
I met the same problem.
Even set up the certication in 3CX server side and restart the 3CX pbx system, this issue still exist.
Need get some help?