Have done some testing which has helped me to understand more on how call recording functions.
It wasn’t immediately obvious to me how it all worked, so hope this will assist others.
MANUAL RECORDING FROM SOFTPHONE
• On the 3CX softphone, ticking the Record as local files box does NOT record calls unless you click the record symbol on the main phone GUI when a call is connected & in progress.
• If “Record as local files” is enabled, the recording will be held on the local machine & the file will be available for “Listen” from the softphone GUI
• If “Record as local files” is not enabled, the recording will take place on the 3CX server in the virtual extension folder (10000 on my system) for incoming or “ext number” folder for outgoing calls.
•
AUTOMATIC RECORDING FROM 3CX SERVER
• On the Server Management Console extension config “Other” tab, when record all calls is ticked, incoming calls will show in the 10000 folder & outgoing in the “ext number” folder
TRANSFERRED CALLS
• Incoming call will record both initial segment & transferred segment in the 10000 folder, even if the second extension is not recorded
• Outgoing call will record both initial & second segment in the folder for the calling ext even if the second ext is NOT set to record all calls (Provided the first ext is set to record calls)
• If the initial ext for outgoing call is not recorded then only the segment after transfer will be recorded if THAT ext is set to record. (the recording will appear in folder for first ext!)