SBC config reference ?

[A.Takacs]

Hi

I have just deployed a debian-based SBC and somehow have ended with what seems to be a generic config file



Although most of the content seems self explanatory I was wondering if there is a reference for all the fields in this file and/or an easy way to recreate it (ie to re-run the setup wizard that seems to have failed).

 

[Alphabetic]

Not sure how you've managed that, did you follow instructions from here?

https://www.3cx.com/docs/3cx-tunnel-session-border-controller/

I would suggest removing in and installing again

sudo apt remove 3cxsbc --purge

 

[ChrisC_3CX]

I think what kieferschild mentioned would be the way to go here.

If for any reason you get the same issue you may actually need to re-deploy the OS.

You mention debian-based SBC, if this is not a raspberry pi, do make sure to download and use the 3CX ISO mentioned in the guide which contains Debian 9.

If you are using a Pi 4, you might want to consider re-flashing the sd with the ISO image found in our guide before re-installing just to be safe.