SIP phone D-Link DPH-140S

[VladislavA]

I've tested basic functions SIP phone D-Link DPH-140S with 3CX (v3.0.1928) today.

Just worked.

 

[3CXsupport]

Thanks for the leting us know !

It's good to hear about the (less mentioned) successful experiences with the PBX too

 

[5qg4]

Hi VladislavA,

I would like to have more details for your test.

Tested at LAN or over internet (NAT or direct)?
3-way Conference?
Call Transfer?
Support config download from FTP, HTTP and TFTP?

Thanks

 

[VladislavA]

The Hold button works fine.

Call transfer is in testing now.

I can't try 3-way conference because I have only one D-Link DPH-140S.

 

[VladislavA]

The Transfer button on DPH-140S doesn't work.

Unsuccessful transfer attempt produces the record in the 3CX log:
10:35:16.312 CallConf:nIncoming [CM103002] Call(14): Incoming call from 112 (Ext.112) to sip:[email protected]:5060

It

 

[VladislavA]

Bad thing 1
***
Ethernet sockets are too weak. I forecast short life in production zone.

Bad thing 2
***
There is no Reset button at all. You can reset phone through standard web interface or by executing undocumented procedure (you can get it from D-Link technical support).