SNOM D810 support

[ArneDery]

Hi,

Currently, there is no supported firmware available for the SNOM D810.

Do you have any information on when support for this model might be introduced?

Thanks in advance for any advice

 

[BrunoI_3CX]

Please note that since the Snom D810 IP Phone is not currently a 3CX-supported device, we do not have a supported firmware available to provide you with.

Current supported Snom D8 series devices are Snom D812, D815, D862, D865, and SP800 models: https://www.3cx.com/sip-phones/snom-d8-series/

Please refer to the link below when checking for supported devices: https://www.3cx.com/sip-phones/

Lastly, please be aware that updates regarding newly supported devices are announced via the 3CX blog: https://www.3cx.com/blog

 

[ArneDery]

Please note that since the Snom D810 IP Phone is not currently a 3CX-supported device, we do not have a supported firmware available to provide you with.

Current supported Snom D8 series devices are Snom D812, D815, D862, D865, and SP800 models: https://www.3cx.com/sip-phones/snom-d8-series/

Please refer to the link below when checking for supported devices: https://www.3cx.com/sip-phones/

Lastly, please be aware that updates regarding newly supported devices are announced via the 3CX blog: https://www.3cx.com/blog

Thanks for the feedback, I was just checking in. Could have been that it was in the last stages of completion.

 

[rlg]

Also looking for D810 support, as well as D895
Many thanks !

 

[BrunoI_3CX]

Also looking for D810 support, as well as D895
Many thanks !

At the moment, we do not have any new information on whether these devices will be supported in future updates.

Please note that any updates regarding newly supported devices will be announced through the 3CX Blog:
https://www.3cx.com/blog

 

[rlg]

Thank you very much @BrunoI_3CX for your feedback
I'll then keep an eye for this on the blog, goal of my message was simply to confirm community interest into these devices
Thank you again !