Snom PA1 strobe

[bbaker73]

Can anyone point me to any setup documents on wiring/configuring the Snom PA1 with a speaker and/or strobe? I'd like to set up paging to activate a strobe.

 

[eddv123]

Hi bbaker,

The PA1 is still supported in the 3CX>snom provisioning template.

All the documentation I can find on the PA1 and 3CX can be found here:

https://www.3cx.com/sip-phones/snom-pa1/
http://wiki.snom.com/Snom_PA1/Documentation
http://downloads.snom.net/documentation/UM_PA1_en.pdf

I used one of these with 3CX and a speaker and it worked perfectly well. Connect the devices wires to the speaker terminals labelled "Speaker". Connect the "+" wire with the red terminal, connect the "-" wire with the black terminal that should be it.

 

[bbaker73]

Thank you!