Softphone V15 does not convert + to 00

[MastexSoftware]

Since my update from V14 to V15 my Windows Softphone does not convert the + to 00 anymore.
The setting in the accountsettings is still active and seems to be correct.

But when entering (or copy-paste, or using the hotkey F11) a phone number starting with a +, the + is not converted to 00.

Anyone any idea?

 

[ian.watts]

Same issue.. I was thinking of trying an outbound rule to "fix" that issue and see what I get. If I try the redial from the app, it fails to route. I have to copy/edit/paste for it to work at all.

I may have to adjust the inbound CID to drop the + there.. I'd rather not have to do that if I didn't have to. E164 is set to drop if same country (+1), but I'm not sure if that even comes into play.

Haven't tried enough things yet.. maybe somebody else has, or 3CX can reply with a better answer.

 

[YiannisH_3CX]

Hello there,

Check and see if the following option is selected on the widows client:

settings >> configure accounts>> double click on the account>> advanced settings>> scroll down to replace + with 00 and make sure it's selected.

Let us know if this worked.

 

[MastexSoftware]

If you read my first post, you will find the answer....
Yes, this is still enabled, and it is still not working.

 

[YiannisH_3CX]

Is your phone in CTI mode? This option is for CTI mode as the hard phone cannot process the + sign.
The windows client can send the + sign to the PBX and from there the PBX will look in the E164 rules to see how this will be processed. If E164 is disabled then the + sign will be handled in the outbound rules as you specify.

 

[ian.watts]

I'm in softphone mode, E164 processing is enabled, and it doesn't work.