SPA-3102 Disconnect Tone dont work

[AldoLinares]

I am trying to configure disconnect tone on my SPA-3102, its supposed to be like this:

425@-30,425@-30;1(.25/.25/1+2)

I configure it and dont work.

I am located in mexico.

Thanks

 

[AldoLinares]

Here is my log

05:44:18.859 StratInOut:nHangUp [CM104007] Call(41): Call from Ln:10001@Telnor (7008110) to 801 has been terminated by Ln:10001@Telnor (7008110); cause: BYE; from IP:172.16.4.200
05:43:16.984 CallConf:nProvisional [CM103003] Call(41): Ext.102 is ringing
05:43:11.343 MediaServerReporting:TMFhandler [MS211000] Call(41) Ln:10001@Telnor (7008110): DTMF (RTP) from 172.16.4.200:16432 arrived. in-band DTMF tone detection is turned off.
05:43:08.343 CallLegImpl:nConnected [CM103001] Call(41): Created audio channel for Ln:10001@Telnor (7008110) (172.16.4.200:16432) with Media Server (172.16.4.90:7412)
05:43:08.328 CallConf:nIncoming [CM103002] Call(41): Incoming call from 10001 (Ln:10001@Telnor (7008110)) to sip:%[email protected]

 

[AldoLinares]

The TONE FOR MEXICO IS:

425@-30,425@-30;2(.32/.32/1+2)

It's working right now