spa 3102

[techworx]

with reference to the post by invisage,(SPA-3102 Gateway PSTN Outbound Dialling Problem) can anyone please clarify how to set up a standard ata extension in 3cx, can only see how to set normal extensions

 

[Anonymous]

The ATA is setup just like a normal extension, then simply connect the phone to the ATA.

Thanks,

 

[Henk]

The ATA is setup just like a normal extension, then simply connect the phone to the ATA.

Thanks,

Keith,

Can you elaborate on that, my understanding was that an ATA cannot be an extension, but I am hoping i am incorrect.

H.

 

[Stuck101]

I actually have an SPA-2102 setup as an extension to connect a DECT 6 cordless analog phone to 3CX, has worked out fine.

 

[amygoda]

Hello
Just add new pstn
name it and mark spa 3102
change the port to 5061
then put the data in spa pstn

 

[ess]

http: //www.3cx.com/voip-gateways/linksys-3102/ - NO LONGER AVAILABLE

Point 19 starts discussing how to add a phone to the FXP port to function as an ATA adaptor. Basically, you can plug in any standard POTS phone to that and it'll function like a SIP phone. There are codes in the ATA setup for * codes such as transfer, etc. that you can set.

good luck!

 

[Henk]

Well Well what do you know,

I might brush up the old dect phones.

The PSTN line still functions as a PSTN incoming and outgoing?

H.

 

[Stuck101]

Hello Henk,

I might brush up the old dect phones.

The PSTN line still functions as a PSTN incoming and outgoing?

Yes, actually we use this daily as an active extension, no problems, audio quality has been quite good.