Times based call routing

[rinchu]

Hi,
I need to know the way to configure the inbound call route to get ring with in four different extensions based on the time.
00:00 to 09:00 --> extension 101
09:00 to 12:00 --> extension 102
12:00 to 17:00 --> extension 103
17:00 to 23:59 --> extension 104

Please suggest..

 

[Saqqara]

The simple way is to use CFD, if you have Pro or Ent license.

https://www.3cx.com/docs/manual/call-flow-designer-manual/

Example of time base routing https://www.3cx.com/docs/cfd-routing-calls-time-day/

 

[rinchu]

The simple way is to use CFD, if you have Pro or Ent license.

https://www.3cx.com/docs/manual/call-flow-designer-manual/

Example of time base routing https://www.3cx.com/docs/cfd-routing-calls-time-day/

Thanks Saqqar...
I've tried the same configuration ( attaching here the file) , but always call rings on the primary extension (200)

 

[rinchu]

Thanks Saqqar...
I've tried the same configuration ( attaching here the file) , but always call rings on the primary extension (200)

..... It was a mistake in compiling. Now i am able to divert call based on the call flow configured. I'm facing a small challenge in value adding in c# code --> return DateTime.Now.Hour >= 7 && DateTime.Now.Hour < 14; ; how i can add the 7:30 in place of 7. while compiling , its giving error.