calls coming in from my cisco gateway are getting these errors....
I found where need to put the inbound pramaters.. I just cant figure out what to put in there...
I would like to some place a rule that "all calls" from the gateway ( @10.101.21.1:5060 as seen below) will be accepted, but again I cant find the right combonation for the rule... can anyone point me in the right direction?
I found where need to put the inbound pramaters.. I just cant figure out what to put in there...
I would like to some place a rule that "all calls" from the gateway ( @10.101.21.1:5060 as seen below) will be accepted, but again I cant find the right combonation for the rule... can anyone point me in the right direction?
Code:
14:42:00.281 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 10.101.21.1:5060;branch=z9hG4bK42169D
Max-Forwards: 69
Contact: <sip:[email protected]:5060;transport=tcp>
To: <sip:[email protected]>
From: <sip:[email protected]>;tag=EF51C80-1A7A
Call-ID: [email protected]
CSeq: 101 INVITE
Expires: 180
Min-SE: 1800
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Date: Mon, 05 Apr 2010 18:41:28 GMT
Supported: 100rel, timer, resource-priority, replaces, sdp-anat
Timestamp: 1270492888
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow-Events: telephone-event
Content-Length: 0
Remote-Party-ID: <sip:[email protected]>;party=calling;screen=no;privacy=off
Cisco-Guid: 2923342421-1075384799-2237585480-3304152238
14:42:00.281 [CM302001]: Authorization system can not identify source of: SipReq: INVITE [email protected]:5060 tid=42169D cseq=INVITE [email protected]:5060 / 101 from(wire)
