v10 - SPA400 - Call ID - how to mask it???

[jr3151006]

Hi,

looking at the "Server Activity Log" we found the information bellow; since too many users face issues to get the caller ID from Linksys SPA400, there is a way to 'reconstruct' the caller ID in a way to remove/change the name of the caller?
Take a look the attachment.

From: "- 11002"<sip:anonymous@localhost>;tag=b01a8c0-13c4-505b996a-bc6d701e-5fbd4661

 

[jr3151006]

Can I accomplish that replacing some SIP Field (what?) on the 'Inbound' settings for that gateway???

 

[jr3151006]

My SPa400 is using the Frmwr: 1.1.2.2.

Even trying to use the advice from "http://fonality.com/trixbox/node/38678" to set the Ports as "OFFx" (where X means the port number), It still shows as anonymous!

 

[jr3151006]

Probably the 'caller ID' is the biggest issue for the SPA400!

https://supportforums.cisco.com/thread/2072869

 

[jr3151006]

Changing the text for "Port ID" on SPA400, just replace the text showed when receiving call, but the number still show as anonymous.

 

[jr3151006]

Even changing the "Caller ID/CP Tone Method" to "European FSK' stil not working

 

[jr3151006]

I was trying to use some advices from this post:
https://communities.cisco.com/message/32982

 

[jr3151006]

After change from "ETSI DTMF" (recommended for Brazil) to "Noth American", the SPA400 cannot recognize the line signal...

*** so obvious.