Yaelink T41P Provision Template

[ETAU]

Hi - I have two settings that I would like to change on the YealinkT4x.ph for a T41P. I have gone through the template a few times and cannot see where I can change these two settings:

1. Change the Yealink screen saver time. Every 10 seconds the screen flashes Yealink. I would like to either change or disable this.
2. I would like to force the transport for one phone (modified template) to use TCP for transport in the accounts page properties. Is there a way for force TCP as opposed to UDP in the template?

 

[Saqqara]

Can answer question 1 , disable logo

Search for phone_setting.lcd_logo.mode , and change it to 0

For question 2, not totally sure

Search for,

#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
account.1.transport =

 

[ETAU]

Can answer question 1 , disable logo

Search for phone_setting.lcd_logo.mode , and change it to 0

For question 2, not totally sure

Search for,

#Configure the transport type; 0-UDP (default), 1-TCP, 2-TLS, 3-DNS SRV;
account.1.transport =

Hi,
First one solved. Thank you.
I have searched for UDP and transport. When searching for UDP I see a few results, but related to nat keep alive. When I search for the word "transport" the only reference is the last line of the below text. I tried changing this to 1 before, but whatever it did, it didn't change the transport protocol.

account.1.failback_mode = 0
account.1.failback_timeout = 3600
account.1.hoteling.auto_login_enable = 0
account.1.hoteling.enable = 0
account.1.hoteling.password = 0
account.1.hoteling.user_id = 0
account.1.transport = 0