We have just upgraded to v16 of 3cx and all has gone well except that all of our Yealink T23G handsets are showing a warning that the firmware is out of date and they won't auto provision.
The phones are all on 44.83.0.55 and I have tried to manually upgrade to all of the versions listed on the Yealink site (44.84.0.10, 44.84.015, 44.84.90, 44.84.0.125) and the 3cx download of 44.84.0.95, all fail after 15 seconds and the phone reboots. I have seen in other posts that there was a v44.84.0.35 available that worked for some people with the same issue.
I had one T23G that was on 44.84.0.15 and that upgraded fine to 44.84.0.95
Any ideas what I can try or where I can get v44.84.0.35 to try as an interim update before going to the newer firmware? Thanks
The phones are all on 44.83.0.55 and I have tried to manually upgrade to all of the versions listed on the Yealink site (44.84.0.10, 44.84.015, 44.84.90, 44.84.0.125) and the 3cx download of 44.84.0.95, all fail after 15 seconds and the phone reboots. I have seen in other posts that there was a v44.84.0.35 available that worked for some people with the same issue.
I had one T23G that was on 44.84.0.15 and that upgraded fine to 44.84.0.95
Any ideas what I can try or where I can get v44.84.0.35 to try as an interim update before going to the newer firmware? Thanks
