Yealink T26P supported... illusion ??

[itgs]

Reading this article:
https://www.3cx.com/sip-phones/yealink-t20p-t22p-t26p-t28p/

I check that T26P model is supported with "final firmware version 6.73.0.60"
Great !

So I navigate in the Yealink website support section to download the firmware but the newest release is : 6.73.0.50 !

http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=17

And now... ??? What I have to do ???

Thank you

 

[cobaltit]

The 3CX supported firmware versions are often not listed on Yealink's website. So typically you would just provision the phone with whatever firmware it is currently on and then upgrade it from the console.

 

[Sopock]

That can be confirmed on their forum:

About the firmware of the T26, the 6.73.0.50 is the latest commercial version， and the 6.73.0.60 is the version that we modify it for 3CX.

 

[YiannisH_3CX]

You can download the latest firmware from the updates section of the management console. It can be found at:
C:\ProgramData\3CX\Instance1\Data\Http\Interface\provisioning\%provisioning_folder%\firmware_new
for linux:
/var/lib/3cxpbx/Instance1/Data/Http/Interface/provisioning/%RandomFolder%/firmware_new/Yealink
You can get it from there and update your phones

 

[fred_gallon]

I'd strongly discourage to install the lastest firmware for the T-26P - it locks up the phones every now and then, very slow respond-times, reboots randomly, keeps ringing though the call has been finished since minutes, ...
I'm looking to find a previous version of the firmware and will install it.

 

[itgs]

I'd strongly discourage to install the lastest firmware for the T-26P - it locks up the phones every now and then, very slow respond-times, reboots randomly, keeps ringing though the call has been finished since minutes, ...
I'm looking to find a previous version of the firmware and will install it.

Hi Fred !

Could you tell me wich version are you talking ?
I installed the 6.73.0.50 and all is working fine.

I'm evaluating to install 6.73.0.60 because 3CX notify that previous version is not supported (check image attach).

Thank you

 

[[email protected]]

How can you manually update the firmware if you system is running on Linux in the cloud on OVH? I have one T26P that refuses to update from 6.73.0.50 by provisioning.

 

[YiannisH_3CX]

If you have SSH access you can follow the path provided above for linux. You will find the firmware listed under there.