Solved Yealink T42G No Red BLF

[[email protected]]

We recently upgraded our Yealink phones to 29.80.0.110 and the BLF light now always stays green even when a call is parked. We are using 3cx V 14 SP3

 

[[email protected]]

Update: I am starting to think this is something with 3cx, because I am being told the issue started before the firmware update rollout and I have a T46 V28.80.0.95 that does the same thing.

 

[CentrexJ]

Update: I am starting to think this is something with 3cx, because I am being told the issue started before the firmware update rollout and I have a T46 V28.80.0.95 that does the same thing.

Sounds like your 3cx reverted to the pbx/free edition. check and make sure the license is activated.

 

[[email protected]]

License was activated. A reboot of the phones resolved the issue. Some Windows updates were installed previously on the server. It appears that rebooting the phone server after update somehow initially caused the issue.

 

[jholcombe]

We didn't have this problem until we updated our T46G's to 29.80.0.110. Now if the 3CX server is rebooted, or of the connection between the server and the phone goes down for a period of time, none of the BLF lights will work on our T46Gs unless we reboot them. This used to not be an issue.

I wonder if 29.80.0.130 works with 3CX v 14? I see a thread on Yealink's forum that indicates it corrects the issue. http://forum.yealink.com/forum/showthread.php?tid=32821

Other threads:
http://forum.yealink.com/forum/showthread.php?tid=16066