This guide provides instructions on how to factory reset all the phones supported by 3CX Phone System. Factory reset will take the phone to the original device settings. This is useful when you cannot get the phone to work and would like to start with a fresh configuration. Most of the phone guides on our blog assume that the phone has been factory reset.
Search for the model of your phone in the following table and use the instructions as needed.
Note: When you Factory Reset your phone, all the settings that you have configured in the device will be lost. You would need to re-provision or re-configure the phone after doing a factory reset.
Cisco 303, Cisco 502g, Cisco 504g, Cisco 508g, Cisco 509g, Cisco 525gFrom the phone, navigate to the Menu of the phone > Select Option 14 to factory reset the phone > Press OK |
Yealink T-20, T-22, T-26, T-28, T32, T38Keep "OK" pressed for 10 seconds and then press OK to confirm factory reset OR On the phone itself, navigate to Menu > Settings > Advanced Settings > Enter the phone password (Default: admin) > Select 'Reset to Factory', and press OK. Confirm that you want to reset to factory settings. |
Polycom IP 301, 501, 550, 601, 650 and 670Press and hold 4, 6, 8 and *. You will need the admin password to proceed with factory reset. The default password is '456' |
Polycom IP 320, 321, 330, 331, 335, 430, 450, 560 and 7000Press and hold 1, 3, 5 and 7. You will need the admin password to proceed with factory reset. The default password is '456' |
Polycom IP 4000, 5000 and 6000Press and hold 6, 8 and *. You will need the admin password to proceed with factory reset. The default password is '456 |
Polycom VVX 1500Press and hold 2,4 and 6. You will need the admin password to proceed with factory reset. The default password is '456' |
