call forward

  1. Forwarding Originator's Caller ID

    Good morning all, I am trying to figure out how to forward originators caller id (caller A) to my end destination. It seems whatever my settings are it will not forward the originators caller id. I have checked with my carrier and all my settings are correct there. Which points to a 3cx setting...

  2. "also ring my mobile" option timeout

    Hello, We previously experienced an issue with call forwarding where the callee’s number was displayed instead of the caller ID. We have resolved this by enabling the "also ring my mobile" option, which now correctly displays the caller's number. However, we would like to know if it is...

  3. Redirect incoming Ring Group call to extension on Yealink T46S

    Calls come into the ring group, a particular extension (113) in that ring group wants to enable Call Forward Always on the phone to send that incoming ring group to another extension (112). 112 is also part of that same incoming ring group call. I have a theory that it redirects to voicemail...

  4. Employees in the 3CX application do not see that they have a call through someone else

    Good afternoon. I couldn't find a similar post, so I will try to describe our problem in as much detail as possible. After upgrading from v18 to Version 20.0 Update 3 (Build 806 Release) we found that call forwarding is not shown in the application (latest apps iOs/Androis) , only the fact of...
    • Malyar
    • Thread
    • 3cx app call forward
    • Replies: 3
    • Forum: iOS

  5. 3cx V20 - Forward to external number with originatorcallerID

    Hey We are using Fuse2 as a trunk and number freedom/spoofing is enabled their end. In V18 if we forward a call to a call handling service for example (external number) it would forward the original caller ID. I can see we have less options in V20 and it forwards my trunk number instead. Can...
  6. U-A

    Solved Call Forwarding not working

    One of my clients is a small office that during weekends isn't available to answer calls, so they are forwarded to an answering service. We had this working for months but stopped working a few days ago..inbound/outbound all fine except for call forwarding(tried other DIDs as well to no avail)...
    • U-A
    • Thread
    • call forward call forward to outside number fowarding
    • Replies: 2
    • Forum: Phone System / PBX
  7. ronenba

    hosted pbx call forwarding to mobile

    I setup extension 500 with my Cell / mobile phone, also settings so if no answer will go to mobile phone and it doesn't work any ideas?
  8. ronenba

    call flow call flow toggle control day/night day/night

    looking to create a day/night button toggle control During the day I need the calls to ring n a group and at night (example *280) answer by extension 500 and we can forward all calls from this extension to a cell phone I could not find the option for call flow , or toggle from day/night (Not...

  9. Solved Call forwarding to external fails - "no route exists"

    Hi all we are using 3CX at our office, and have done so for about 12-18 months now. Recently I discovered that call forwarding to external numbers is not working, when I conducted some testing I noticed in the call log it says "no route exists" as attached. Please could you assist? Detailed...
  10. Bly

    Solved Forwarding to external number

    Hi all, on version 16.0.655 (hosted on Windows) I'd like set up the (standard) digital receptionist to forward to an external number some keys. As long as the option "forward to" is not there, I had created an extension with mobile number the number I want to forward to (I call a landline...

  11. Solved Outbound Rules for Forwarded Calls

    Hi there, This isn't a new issue but I cannot see any posts where this has been resolved... The scenario is that a call comes into the system and a rule forwards it out to an external number. The forward fails with the message "target endpoint cannot be built" because there is no matching...

  12. Yealink T41S - Call Forwarding.

    Hello, I can see some past history on these forums in relation to call forwarding on Yealink phones being broken from V15 onwards. What is the latest situation on this. I am in the progress of deploying 60+ Yealink T41S (3CX supported) phones to my business and the first user to "test" his...
  13. akjon RooSho

    How to call any extension using single SIP Trunk

    Hello, I've recently got started with 3CX. I've 5 extension on my 3CX PBX and I've manged to get a SIP Trunk. (As shown in the image). I've added the SIP trunk with the PBX and able to call any external PSTN/Cellular Phone operator. But the problem I'm facing is with incoming calls. I don't...
  14. Paul Omans

    Forward Call on License Limit

    I would like an option to be able to forward a call to an external number upon the license limit being reached. Not sure how realistic this is, but I figured I'd see if there was any mutual interest on anyone else's end for this to be implemented.
    • Paul Omans
    • Thread
    • call forward call forwarding license limit
    • Replies: 0
    • Forum: Server

  15. Call forwarding doesn't display external phone number

    Hello, we only see our office phone number displayed on our cell phone when we forwarded an extension in our 3cx PBX server. E.g. Ext 100 is forwarded to a cell phone. Caller from another cell phone or outside phone, calls extension 100 but caller ID only shows the office main phone number...

  16. Feature Request: Call Forward Management directly from (desk)phone

    There is no way to manage the call forward directly from the phone (eg yealink) to a desired ext. or external number (let's say for day off or specific need of the user) ------------------------------------------------------------------------- I explain: A lot of user just equiped with a...
    • mmisolution
    • Thread
    • call forward forward management
    • Replies: 7
    • Forum: Server
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom