I have a Grandstream GXW-4108.. Now I initially attempted to do the Auto provisioning, and following the instructions in the Blog and for whatever reason it didn't auto provision. So, I was able to get it set-up manually by the SIP user ID and Account ID, and the SIP Server, and then...
I'm trying to provision a GXW4104, and cannot get it to fetch the configuration. I'm using cloud 3CX, hosted by 3CX, and the gateway has an internal IP on my network. I've followed all the instructions here https://www.3cx.com/voip-gateways/grandstream-fxo/#h.epuoqzwd76k9 and checked this one...
I have installed a Patton SmartNode 4141 4 Port FXO PSTN Gateway and connected up 3 working PSTN lines to the first 3 ports.
Patton firmware has been updated to the latest and I have meticulously followed all the instructions on the 3CX webpage to configure and provision this device.
After the...
Hi All, I'm new to 3CX and looking for some advice, have recently set up 3CX v18 on a Raspberry Pi, working well with 2 IP handsets.
Have worked through the training academy videos for the basic certification (haven't bother with actual certification... well as yet) so covered perhaps the...
Dear community,
I know this is not supported, but several users in this forum reported this as working.
I have a landline that i would like to connect to my 3CX (cloud based) via SBC using Patton 4112 FXO.
https://www.3cx.com/voip-gateways/patton-smartnode-sn4112/
I have followed this guide...
V16.0.2.910
Enterprise License
Debian Linux
Grandstream GXW4104 with the latest Firmware (1.4.1.5)
I follow the directions here: https://www.3cx.com/voip-gateways/grandstream-fxo/
It will not provision. (Just spend an hour rebooting, Hard power down and power back up, looking at logs....)
If...
I know this is silly to ask. But has anyone configured Linksys SPA3000 with 3CX V16!
Can anyone help me with the complete procedure?
I've tried searching in google and in this forum but was not helpful.
I couldn't even resister 3cx extension on it.
Any kind of help would be appreciated.
Regards
Do you guys know any FXO card that supports both Windows and Linux that will work for 3cx? we've got a server but its fxo's only supporting unix and we'd like to have windows do you guys know any?
Hi,
Im using 3cx 15.5.5 with planet Voip gateway ,intercom is working fine but inbound and outbound calls are not working , in voip gateway sip trunk already registered with 3CX and outside calls are coming until gateway.
sip trunk and line status atttached
PSTN line connected to the FXO port 1...
Hi,
I'm looking to setup 3CX with 2 x PSTN telephone lines and need some advice as to the best way to do it. I have:
3CX v15 running on a server (physical box, Debian, free license)
3 x Yealink IP phones (T26p and W52)
1 x Linksys SPA3102
2 x PSTN lines (I'm in the UK, they are from BT)
Line 1...
Hello,
Just started playing around with 3CX and having a problem trying to get the Patton SN4112 FXO to make outgoing calls. Activity log has an entry stating that Cause: 503 Service Unavailable/INVITE from 192.168.0.71:5060.
The Patton has been factory reset and the configuration file...