phones

  1. Show offline phones / devices

    If a customer has a lot of phones or other devices, it's hard to see if one or more of them are offline, as the phones overview only shows connected devices. I'd like to request a separate view or option to also include offline devices. This also makes it easier to remove old devices, which are...
    • JoshuaM
    • Thread
    • offline devices phones
    • Replies: 0
    • Forum: Server
  2. edfosho

    Adding Multiple Phones for a User in Webclient Admin View

    Adding Multiple Phones for a User in Webclient Admin View - is this possible, or am I just missing the option to do it? E.g. a user has a phone set up and you want to add a second.
    • edfosho
    • Thread
    • phones web admin webclient
    • Replies: 6
    • Forum: Web Client
  3. MMZ

    Unsupported Unify HiPath Cordless IP - 3CX connection

    Hello, I know that 3CX don't support this kind of phones and DECT's but can we connect 3CX and these phones, is there any way. Best regards, MMZ
    • MMZ
    • Thread
    • 3cx phones
    • Replies: 1
    • Forum: Other

  4. Unsupported Gigaset DX800A Provisioning Template Created

    Hi All. The PBX is working fine and the mobile app works great too - SIP trunk yet to be provisoned. I've been asked by the powers that be to provision these Gigaset DX800A handsets. Before we even get to the fact that these models are 'unsupported', I've followed the steps outlined in the...
    • ayazaali
    • Thread
    • gigaset models phones provision templates
    • Replies: 3
    • Forum: Other

  5. How to force UDP Transport?

    I have my own edited script which I use to auto-provisions phones for 5 Yealink T33's - However, by default they provison the phone to use TCP. What entry do I need to input below to force the phones to use UDP transport when they register? They are all registerd as "Direct SIP(Stun - remote).

  6. Phone Recommendations

    I see comments about not buying Yealink T2s because they will eventually be going EOL. So what Yealink models in the T4 series are people recommending and deploying?
    • amir_
    • Thread
    • phones yealink
    • Replies: 4
    • Forum: Other

  7. DID's With FXO Gateway?

    We have a PBX setup with 8 analog linens going into an FXO gateway. We had recommended against this setup (we advised to get sip trunks), but they didn't listen. Either way i'm wondering if its possible, since we are using all 8 analog ports on the gateway, to setup a few extra DID's for some...
  8. Infinitel_LeeM

    New Yealink T30's compatible when?

    Hi all, Don't know if it should be here or the Idea's thread but do we know when the new Yealink SIP-T30P T31 T31P and T33P be available to auto-provision and compatible with the 3CX system? Kind Regards, Lee Matthews

  9. Is there a way to provision Avaya H229 on 3CX?

    Hello! I am new here. Have successfully installed 3CX and firewall check gave me the green light. ;-) I have an Avaya H229 to play with, is it compatible at all? It has been detected on the dashboard, but on the dropdown menu it is not listed. The Avaya datasheet for H229 say it works with...

  10. Cannot Register ANY Phones

    We have been running our local 3CX instance for a number of years. Recently we needed to add new phones, but have been unable to do so.... I have gone as far as setting up a new 3CX Server to rule out a configuration issue, but it appears that there's something that I'm missing as both refuse to...
  11. Evolute IT

    GXV3370 Template

    Hi everyone, I was wondering if someone had made a template for the Grandstream GXV3370 phone? I am switching to 3CX but I don't want me and my employees to change phones. So did someone already made one?

  12. Solved Phone not provisioned via SBC

    I have 2 phones with same firmware and one of them is connected to 3CX via SBC, and other isn't. I will upgrade phones after hours, but I would like to know if there is something else I should do to avoid this. I have checked, and both phones are configured to use SBC, so it's not a error in...
  13. WindowedOffice

    No Sound on External Calls

    Hello everyone, We've been trying to resolve an issue with calling out externally. When a user answers a call made from our network there isn't any sound from the callers phone or the callees phone. The calls get connected but no audio can be heard either end. This appears to only happen after...
  14. that1guy

    Verizon Yealink Phones

    I have been looking into picking up some extra Yealink phones for testing purposes. Looking on eBay I saw a lot of Verizon Yealink phones, and many said "will only work on verizon network". My question is, is there any reason I couldn't provision the phones to work with 3cx? Has anyone had...
  15. daneke

    Htek 862

    I have a new 3CX Linux and setup Windows clients, Android, IOS, and Yealink T48P and Cisco legacy with no problems. I just bought 12 of these phones. I unboxed and upgraded the firmware to the current version. The phones appeared in my management console. I provisioned them and they ring and...
    • daneke
    • Thread
    • extensions htek htek uc862 phones provisioning problem uc862
    • Replies: 1
    • Forum: Phone System / PBX

  16. Yealink T42G

    We have 50 new Yealink T42G phones in boxes ready to deploy. My 3CX Phone Management page says "Not Supported 29.80.0.95". This is a new installation, do I need to send them back? What does it mean "No longer Supported"?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom