t46s

  1. Solved Yealink T46S - no service - not provisioning

    Hello, I have many Yealink T46S phones and they all auto provisioned after doing a factory reset. I just bought a few more and I cannot get these to provision. I added the MAC address to my system, did a factory reset, and I even tried entering the Provisioning URL on the phone manually...
    • guzty
    • Thread
    • provisioning t46s yealink yealink t46s
    • Replies: 4
    • Forum: Yealink
  2. Maurice Lefevere

    3CX BLF Pickup Behaviour

    Hi All, So as far a i know this has always been working, but i can't get it to work on v18. I will try to describe it as good as possible. Devices: Yealink T46S Yealink W60B DECT User: Rights: Perform operations (divert, transfer, pickup) I gave, to test it, the user all possible rights on...

  3. Solved Provisioning link does not seem to work on 3CX - Pi

    I have an issue that I just cannot crack...I recently installed 3cx on a recent install... Everything else seems to work well - soft phones work, can make calls out, etc.. When I attempt to provision my Yealink T46s through 3cx - nothing happens. Next, I manually entered the provisioning URL...

  4. Solved Can't reprovision Yealink T46S

    Hello! We have a cloud hosted 3CX and a local SBC. We use Yealink T23G, T46S and T56A. Phones appear in MC and get their first provision OK. After some changes in BLF, we want to reprovision phone to get them. Clicking "Reprovision" in "Phones" tab works great for the T23G ans 56A but not on...

  5. Extensions changing to DND on their own randomly

    Extensions are registered over local Lan to Yealink T46s phones Phones are on the latest supported firmware Randomly the phones will switch to DND sometimes while on a call. Pressing DND 2 times or changing in the web portal sets it back to availible The extensions do not have auto switch set...

  6. Delayed Dialing Yealink - Remote Phones

    Been wrestling with a problem with a hosted customer who has Yealink T28 & T38 phones and a new T52S. When the customer does an intercom dial "*0 + Extension" from the T2/T3 series to the new T52S, there is a noticeable delay of 8 - 10 seconds before the T52S picks up. The same delay is...

  7. Problems with retaking calls/lines

    Hello, Recently our organisation has upgraded to a 3cx platform. There is still some small things but they are slowly being worked out. The one thing we can not seem to solve is that our frontdesk is accepting calls, they then forward the call to a employee. If the employee does not want the...
  8. @lä

    yealink T46s auto provisioning does not work

    Hi, We use yealink T46s phones in the same LAN as the 3cx server. Unfortunately auto provisioning won't work. The phones use the latest firmware 66.82.0.20. Provisioning using the "Add" procedure in the console and copy the URL to the yealink phone works fine. Any idea whats going wrong? Best...
  9. Kristof Kuderko

    Yealink T46 power saving mode on 66.82.0.20 firmware

    Hi, My phones are T46G and T46S Firmware Version 66.82.0.20 Hardware Version 66.0.0.128.0.0.0 The power saving mode is disabled by template setting features.power_saving.enable = 0 and it works BUT after the phone is rebooted it goes to power save mode after 30 mins (i think it's...
  10. dlaborde002

    PLEASE HELP! Yealink T46S custom config not pushing out to phone

    Please HELP!!! I have been unsuccessful with pushing out a custom template to my Yealink T46S ip phone, paired with an EXP40 expansion module. I am able to effect the time zone with my changes. However, I can not get my line keys or expansion module values to push out. I feel like there must be...

  11. yealink T46S on 15.5.3849.1

    i have been struggling for a few hours to get this working and it is a pain. i plugged in my t46s in to a poe switch and turned on fine and it came with FW 66.81.0.110 and it did not provision at all. i even updated it to 66.81.0.60 as the website shows that is the minimum firmware. and still it...

  12. Download updated Templates but don't push - option?

    Does anyone know if there's a way to download updated templates but NOT to push them - similar to the way that firmware works? We run our phones on a different VLAN than default, the default templates don't reflect that, and (3CX please pay attention to this...) there is no variable for VLAN in...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom