video

  1. H.264 V20

    Is there anyway to allow H.264 video codec in V20 or any plans to bring it back? We used to have video intercoms call a ring group, and the video showed up on Fanvil X6U handsets. This works on systems that were upgraded from V18 to V20; however, any clean/new installs of V20, do not allow video.
  2. Brandan Hermo

    Video Calls on Windows App

    We have clients who need to run scripts during video calls but can't because the Windows app doesn't currently support video (only audio calls) But the VIDEO button that appears in the interface, it's disabled at the moment. Is there any estimate for when this feature will be available? The...

  3. No Video Availability via Web App

    Hello, Trying to make video calls via the web app but the video option is greyed out and not available. Example, when you make a call and someone answers, I can't press the Video button to make that switch. Settings on the computer itself are set to allow desktop to access the cameras. Any...

  4. Fanvil i62 and Fanvil X6U no Video

    Hi, I have a strange issue on one of my systems after upgrading to V20 and I wanted to share it with you and ask whether you have encountered a similar problem. Just to make it clear, I have tried to flash the phones & the door phone with different firmware versions, although it hasn't...
    • Mike94
    • Thread
    • doorphone fanvil v20 video
    • Replies: 5
    • Forum: Fanvil
  5. KMorley

    Solved Are Yealink T58W and T58W Pro phones video camera support

    I am considering ordering a couple of Yealink T58W and T58W Pro phones for evaluation for possible use in an upcoming project. These phones are available with and without video camera. Is the video camera on these phones supported and useful with 3CX V20?
    • KMorley
    • Thread
    • camera t58w t58w pro video yealink
    • Replies: 6
    • Forum: Yealink

  6. i62 doorbell update ?

    Hi I'm using an i62 doorbell from Fanvil with 3CX self hosted system. It works perfect out of video stream that dies evey few days (from what we have seen all the video part of the doorbell dies). It's right now in firmware 2.4.4 as suggested by 3CX (I have done initial firmware update through...
  7. Rick-Arcus-IT

    2N video stream not working on ios app

    Hello, We are using 2N intercoms where we have the intercom dial the 3CX extension, the user can see who's at the door and can use a DTMF code to open the door. When we test this using an Android phone, this works perfectly. The intercom sets up the call. The user accepts the call, then clicks...
    • Rick-Arcus-IT
    • Thread
    • 2n intercom intercom video video call video intercom
    • Replies: 4
    • Forum: iOS

  8. Videomeetings fail: Page comes with empty body

    After updating our locally hosted system, the videomeeting pages */meet/* are delived with an empty <body></body> section. Thus, they do not work. Restarting services / rebooting the system does not help By the way: Why does the page's header include a reference to this api? For European...

  9. Door Phone with Video

    Hello, I am looking for a door phone which will work with video and be able to make video calls with the new 3CX desktop App as well as the Mobile client on Android and iOS. I have found the Fanvil and Grandstream products, but keep on stumbling over sources which claim that the video won't work...
  10. NicholasBarnes

    Specify different ringtone without using queues (no video on queued calls)?

    Hi all, I have a customer with a Fanvil i31S intercom which works perfectly and the users with Fanvil X6U handsets see the video from the intercom camera when they answer a call from it. The problem is that the site would like a different ringtone for calls from the intercom. No problem, I...
  11. ChrisTTG

    Change/Set Default Video Conferencing (Webmeeting) Options

    For quite a lot of Customers (and internally) certain users/individuals (not always joining or able to join) create schedule meetings on behalf of other colleagues and Customers and are often forgetting to adjust the options below, this of course causes some bother when trying to connect and...
    • ChrisTTG
    • Thread
    • change conferencing configure default options organizer participant v18 video webmeeting
    • Replies: 0
    • Forum: Video Conferencing

  12. Problem with Videocall on Nokia Phones

    Good day, We have many Nokia 5.4 devices (50 pcs.) and have a problem with the video call on these devices. The image of the camera (front and back camera) is not visible properly (green image as in the attached photo). It does not matter which client is on the other side. We tested IPhone...
    • taucher.d
    • Thread
    • camera green nokia video video call
    • Replies: 9
    • Forum: Android
  13. DaveA66

    Conference Admin

    I would be great if a system/conference admin could view (and) amend all scheduled conferences from all users and obtain reports of all conferences on the system.

  14. Fanvil I31S

    Hi, So we bought an Fanvil I31S for our hotel. Our purpose is to use it as a doorphone at our gate so we can see who is there and to open the gate. But we can't figure out how to enable the video? We already tried everthing. Making just normal audio calls is no problem. In this article they...
    • Robbejanvdw
    • Thread
    • door intercom door phone door video fanvil i31s video video call
    • Replies: 5
    • Forum: Fanvil
  15. kinetix

    Web Conference Video "Mirror" Image

    We are having more and more people asking about the ability to reverse the video image to prevent the "Mirror Effect" of the video in the Web Meeting. Would love to see this as an option.
    • kinetix
    • Thread
    • backwards image mirror reverse video web conference
    • Replies: 0
    • Forum: Web Client

  16. 2N IP Verso VS 3CX

    Hello, I just bought a 2N IP Verso that i have to configure for my client. My Client has 2 doors that he wants to open with the 2N IP Verso. When his children push the code on the Verso, port A opens, when the house cleaner pushes an other code, door B should go open. Is it possible to stream...

  17. No Video / Audio on Call from Web browser only

    Hello i recently installed the 3cx ver 16 on our debian server and i have the following problem - there is no audio or video will transfer when we do call over the browser but a. call from ios/android to windows app (working 100%) b.call from windows app to ios/android (working 100%) c.the...

  18. Fanvil i32V Door Phone to X210 with Video -- Settings Assistance and Support Timeline

    Hello, I'm trying to get the video working on my Fanvil X210 coming from a Fanvil i32V door phone. Has anyone had any luck with this? I know it is not officially support, but should be soon yes? I'm on the newest firmwares for the Fanvil phones. RTSP streaming from the door phone is working...

  19. Yealink T58 UDP/TCP + Video

    Hello, We use the Yealink T58 for video calls from the door control, I can add and provision the phone with 3CX, but it will only make outgoing calls if the setting Settings>Video>Video Active is set to 'OPTIONAL' or setting the SIP transport protocol to TCP. How do I change BOTH settings in...
    • Woodster
    • Thread
    • servertransport t58 t58v tcp transporttype udp video videophone yealink yealinkt58
    • Replies: 1
    • Forum: Phone System / PBX
  20. kinetix

    Push Desktop Audio for Video Over WebRTC Web Conferencing to Remote Site

    Push Desktop Audio for Video Over WebRTC Web Conferencing to Remote Site Here is the example. Host Site A in WebRTC Web Conference with Remote Site B. Host Site A Shares Desktop Host Site A Plays YouTube Video Currently, it is not possible for Remote Site B to hear direct Audio from the...
    • kinetix
    • Thread
    • audio conference conferencing host remote video web web conference web conferencing webrtc
    • Replies: 0
    • Forum: Server
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom