3CX Android Rejected call Auto Answers on T48

[myfastback.com]

I have a weird problem that came up as I am testing our system to go live.

On my extension 100, I have the 3cx Phone app installed on my Android as well as a T48 assigned. When I receive a call to my extension my 3cx android app and t48 ring. If i reject the call on the android app, the t48 will automatically pickup the call on speakerphone.

I have checked and auto answer is turned off. I have also checked the auto forwards settings, and all look to be correct. I factory defaulted the phone and reapplied the latest provisioning template from 3cx so I know I had a "Fresh" build. I still have the same issue.

I have tried this on another extension with the same 3cx Android app and T38's and there seems to be no issue.

What am I missing?????

Thanks in advance

 

[myfastback.com]

I have done a little more testing:

I have 1 channel voice gateway hooked up, when a make a call from that gateway to my extension and reject the call, my desk phone continues to ring as it should. When I call from another extension (T38) and i reject the call, the T48 goes to speakerphone.

I removed the T48 and swapped in an extra T38 I have and it functions as it should from all extensions. (I reject the call and desk phone continues to ring)

So it would seem this is an issue with the provisioning template for the T48? I will say I was running in demo mode until a week ago when I purchased the full license for v12. When I did that I upgraded all the provisioning templates that were available, this issue COULD have started then.

 

[lneblett]

As an aside, check the firmware and insure that it is the supported version.