Solved 3CX Bridge ports

[THCO]

I have a stupid question.

I have 2 Servers that are both on standard. When I build a bridge between the two what ports need opened up in the firewalls. I think I understand that that since I have standard I cant send presences across to each other.

Is 5060 the only ports I need or do I need 9000-9500?

Thanks

 

[Saqqara]

Port 5090 (Tunnel Port)
https port (used for publishing info)

https://www.3cx.com/docs/manual/connecting-pbx-bridges/

 

[mariosM_3CX]

Hello @THCO

If you are using the tunnel protocol for your bridge then as @Saqqara said, you just need the port 5090, as both sip and rtp traffic will use this port.
If however you do not use the tunnel, then you'll need 5060 and 9000-9500 as well. Note that all these ports should already be open if you are using a voip provider.

 

[THCO]

Hello @THCO

If you are using the tunnel protocol for your bridge then as @Saqqara said, you just need the port 5090, as both sip and rtp traffic will use this port.
If however you do not use the tunnel, then you'll need 5060 and 9000-9500 as well. Note that all these ports should already be open if you are using a voip provider.

I have these open to just my voip provider only to harden my server. I dont use remote extentions. Please feel free to close this.