Solved 3CX Bridging

[eds.pare]

Hi, We are currently trying to setup a 3CX Bridge.
1 is in azure(debian 9 3cx v16) and one in some remote site( windows v16 with static IP).

Under Event Log.

• Registration at **************-Bridge has failed. Destination (sip:127.0.0.1:5080;lr) is not reachable, DNS error resolving FQDN, or service is not available.
  SIP Server ID: 12293 10/12/2021 9:59:12 AM
• Registration at **************-Bridge has failed. Destination (sip:127.0.0.1:5080;lr) is not reachable, DNS error resolving FQDN, or service is not available.
  SIP Server ID: 12293 10/12/2021 9:59:10 AM
• Registration at **************-Bridge has failed. Destination (sip:127.0.0.1:5080;lr) is not reachable, DNS error resolving FQDN, or service is not available.
  SIP Server ID: 12293 10/12/2021 9:57:50 AM

Under Activity Log.

10/12/2021 9:59:12 AM - [CM504005]: Registration failed for: Lc:10101(@**************-Bridge[<sip:10101@**************:5090/UDP>]); Cause: Cause: 503 Remote end of tunnel is not connected/REGISTER from 127.0.0.1:5080

10/12/2021 9:59:10 AM - [CM504005]: Registration failed for: Lc:10101(@**************-Bridge[<sip:10101@**************:5090/UDP>]); Cause: Cause: 503 Remote end of tunnel is not connected/REGISTER from 127.0.0.1:5080

Via email notification

Registration at ************-Bridge has failed.

Destination (sip:127.0.0.1:5080;lr) is not reachable, DNS error resolving FQDN, or service is not available.
I did follow the 3CX guide lines.


IF i don't use the tunnel, the error will be unknown user.

• Call or Registration to ************-Bridge has failed. sip:10101@************:5060 replied: 404 User unknown.; from IP************:5060
  SIP Server ID: 12294 10/12/2021 10:25:47 AM
• Call or Registration to ************-Bridge has failed. sip:10101@************ replied: 404 User unknown.; from IP:************:5060
  SIP Server ID: 12294 10/12/2021 10:24:21 AM

Any idea? Thank you

 

[eds.pare]

Oh nevermind this. i have fixed it.

 

[VasilisV_3CX]

Hi @eds.pare, glad to hear you resolved the issue. If you'd like to add what the solution was, feel free to.

 

[eds.pare]

Hi @eds.pare, glad to hear you resolved the issue. If you'd like to add what the solution was, feel free to.

oh a bit lack of knowledge on my part.. one is i put different virtual number.

And the machine i used got a host file configuration.