3CX on a Terminal Server

[Cynthia Slade]

We have a new 3CX install tomorrow (present system died today) In anticipation of going from V10 to V11 we are considering installing on a 2003 server presently being used as a terminal server (for 1 user only). Has anyone installed on a TS and/or are there any problems in doing so? Only other servers are running SQl and Exchange. Thanks for all feedback!

 

[leejor]

The most important considerations would be the speed of the processor, the amount of memory and hard drive space available.
http://www.3cx.com/blog/docs/supported-windows-versions/

 

[lneblett]

I am afraid more detail is needed. You don't indicate how big a 3CX install nor how the 2003 server is configured. More than likely, you are good to go, but without knowing more, there is some possibility of a problem.

 

[Cynthia Slade]

Thank you for your replies. Sorry I was not clearer that my concern was with a possible problem/conflict with Terminal Server Services running on the same server. The 2003 server has more than adequate prossessor, hard drive and memory. This is a very small install (under 10 users). Thanks again

 

[netswork]

As long as you install 3cx under the administrator account you should be fine. I also would not install it with the server in install mode, like you normally would with applications on a terminal server. There should be no need for the terminal service user to access the 3cx application.

 

[Cynthia Slade]

UPDATE: Installed on Terminal Server and all is working just fine.