3CX SBC Raspberry and SD

[Albert464]

Hi, is it a problem if I install the SBC on a Raspberry with a 16Gb SD and not a 32Gb?
Because I have to set it up for a client and the 32Gb ones I have finished.

 

[Alphabetic]

I've always used 16GB and had no problems. Though, I've always got logging turned off.

 

[Albert464]

I've always used 16GB and had no problems. Though, I've always got logging turned off.

Thanks so much! Which recording do you mean? That of the calls? I don't think that is done locally on the SBC

 

[ChrisC_3CX]

@Albert464
Though we do recommend using a 32GB SD, you may be ok with a 16GB if you do things like keep logs off, have no call recording, utilize the voicemail auto-delete feature, and generally not use features that will slowly eat up the available space.

You can also enable the "Harddisk is at or near capacity" email notifications just in case.

 

[Albert464]

@Albert464
Though we do recommend using a 32GB SD, you may be ok with a 16GB if you do things like keep logs off, have no call recording, utilize the voicemail auto-delete feature, and generally not use features that will slowly eat up the available space.

You can also enable the "Harddisk is at or near capacity" email notifications just in case.

Thanks, but as indicated I only use it as an SBC, I didn't think the SBC saved calls internally. Or am I wrong?

 

[ChrisC_3CX]

@Albert464

That you did! Should you use it as a PBX thought the above would be things to consider!

Note: The SBC does not save calls that is right. It would just be the logs you would need to keep an eye on.