I'm having some problems with incoming calls on 3CX. I have an N95 logged in on 100, and X-Lite on 101. If I set the sipgate line to go to X-Lite, the phone rings as it should, but if I set it to the N95, I get some weird messages in the logging, and the phone doesn't ring.
I know what the errors mean, just not sure why it's doing it.
The N95 is registered and can make and receive calls from/to X-Lite.
Anyone have any ideas?
Thanks.
Code:
00:56:11.339 [CM503008]: Call(16): Call is terminated
00:56:11.336 [CM503015]: Call(16): Attempt to reach <sip:[email protected]:5060> failed. Reason: Not Implemented
00:56:11.335 [CM503003]: Call(16): Call to sip:[email protected] has failed; Cause: 488 Not Acceptable Here; from IP:10.0.0.2:5060
00:56:11.030 [CM503024]: Call(16): Calling Ext:Ext.100@[Dev:sip:[email protected];transport=UDP]
00:56:11.025 [CM503004]: Call(16): Route 1: Ext:Ext.100@[Dev:sip:[email protected];transport=UDP]
00:56:11.024 [CM503010]: Making route(s) to <sip:[email protected]:5060>
00:56:11.022 [CM505003]: Provider:[sipgate] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] Transport: [sip:10.0.0.50:5060]
00:56:11.019 [CM503001]: Call(16): Incoming call from anonymous@(Ln.10000@sipgate) to <sip:[email protected]:5060>I know what the errors mean, just not sure why it's doing it.
The N95 is registered and can make and receive calls from/to X-Lite.
Anyone have any ideas?
Thanks.
