3CX to Nokia PBX connectivity terminal

[qaisdev]

Hi,
I have Nokia 22 PBX connectivity terminal.I was wondering that is it possible for me to route some calls from this Nokia PBX terminal.
I am planning to use the Linksys ATA and make this Nokia as an extention.
So the main challenge will be to route a specific calls starting for eg with 6 through this extention.

If anyone will only tell me that if it is possible to route a call via 3cx own extention that i think i mght be able to make it work.

Kind Regards
Qais

 

[nitup]

It is only possible to route calls thru VoIP or PSTN lines. Key difference is that PSTN lines are registering against PBX, while VoIP lines - vice versa. So if you can register your Nokia as a PSTN line at PBX - than you can route calls to it.

 

[qaisdev]

Hi,
Thx for the reply,actually this is what is going on...
1) Analog phone-Nokia PBX terminal. It works this way.
2)Analog phone-Linksys-Nokia ( It works on incomming calls but on outgoing i get the wrong number info from the cell provider)

Conclusion
It definately works but i am not able see is that when Linksys send the number to Nokia PBx what it tries to delete in that number
I mean the dialing rules and all.Even when i change the dialing rules then still it is trying to send a diffrent number to Nokia which it says that it cannot recognise..
Right now i am trying to find the logs so that i will be able to see what is going on...
But no luck yet ...

Kind Regards
Qais

 

[arpa]

Hi,
I have Nokia 22 PBX connectivity terminal.I was wondering that is it possible for me to route some calls from this Nokia PBX terminal.
I am planning to use the Linksys ATA and make this Nokia as an extension.
So the main challenge will be to route a specific calls starting for eg with 6 through this extension.

If anyone will only tell me that if it is possible to route a call via 3cx own extension that i think i might be able to make it work.

Kind Regards
Qais

Hello, I am an owner of Nokia 22 too, fortunately i am not alone... I have the same problem with you. I am planning to use the Nokia 22 as a PSTN line with a Linksys 3102 adapter, but my case is more complicated. The specific terminal (Nokia 22) is already connected to an analogue PBX . I want to use it simultaneously (Analogue PBX with 3CX) maybe with a cross connector for a testing period , as a transitive step before getting off the analogue PBX. The Nokia 22 has two different ports. The problem is that, if i remember correct, the one "says" PBX Extension and the other PBX Trunk , something like that. I don't know which connector is the correct in my case.

I 'll test , and i 'll post my results. Any advice is acceptable !