Add VoIP Line

[sonlm]

Hi,

I have problem with 3CX when adding VoIP line
I have a free account from VoIPTalk (VoIPTalk.Org)

External Number: 88484787
Authentication ID: 88484787
Authentication Password: ******

Registrar/Proxy Hostname or IP: voiptalk.org
Outbound Proxy Hostname or IP: nat.voiptalk.org:5065
Registrar/Proxy Port: 5065
Outbound Proxy Port: 5065
STUN server Port: 3478
STUN server Hostname or IP: I left it blank

Outbount rule is 8

The VoIP Line status is still "Not Registered" (in red)
When I make call out via VoIP line (with prefix 8) to another VoIPTalk acc - on an IPPhone - it's OK (phone was ringed).
But from this IPPhone call into the PBX (call 88484787) is not possible (receive disconnect signal).

During calls, the VoIP line status is "Not Registered"

VoIPTalk Accs are OK (tested with 2 IpPhone)

Is there something wrong?

Best regards,
Sonlm

 

[miraportuga]

Can you provide us some logs?

Cheers

 

[RobLloyd]

3CX uses port 5060 by default. Your settings you said were to 5065. Did you change the 5060 to 5065 in 3CX?

 

[ihasham]

Port numbers

The port for VOIP talk is as follows:

Registrar/Proxy Hostname or IP voiptalk.org 5060

Outbound Proxy Hostname or IP nat.voiptalk.org 5065

Kind regards,

 

[nb]

Hi

This Voip provider works out of the box with 3cx. Given the settings are correct it registers immediately and I was able to make outgoing and receive incoming calls.

Do not use the Outbound proxy setting and use the Generic Voip Provider. Do not use the Sip Trunk.

Dtmf works and even transfers.

Regards