Solved Afterhours - Not switching.

[Paul Fouche]

Hi All,

After the upgrade our PBX has stopped activating afterhours..
I have checked the following :

1. Checked the time on the Server (correct)
2. Checked the Global office hours settings (they are correct)
3. Checked the Sip Trunk office hours (they are correct)

the times are set from 08:30 - 17:00
Last night i called at 19:00 and the 3cx system just followed the normal call routing no afterhours IVR activating.

Some advice would be appreciated
Paul Fouche

 

[jimbo59]

I just noticed the same problem. Used to work with SP1
I created a new IVR for out of office.
Works now.

 

[Paul Fouche]

I just noticed the same problem. Used to work with SP1
I created a new IVR for out of office.
Works now.

Thanks for this, will create the IVR's again

 

[Saqqara]

Make sure the system is using default office hours by dialing *64 on a handset

 

[YiannisH_3CX]

Make sure the system is using default office hours by dialing *64 on a handset

To avoid confusion the dial code for office hours is empty by default and is configured by you so in your installation could be anything so check under settings / Dial Codes

 

[jimbo59]

The HOL cannot be chosen and does not work in SP2.
As I said earlier you must create a new IVR.
What about this, Yiannis?

 

[YiannisH_3CX]

The HOL IVR only applies for holidays specified in the PBX. If you want to route a call to an IVR when the PBX switches to out of office you need to create a different IVR.

 

[Paul Fouche]

Hi all, The issue has been resolved.. I had to recreate our IVR's after the SP2 update,

Cheers

 

[YiannisH_3CX]

Glad the issue has been resolved