Automatically Try to Register

[Anonymous]

Is there a setting that will cause the server to reset, or retry registering with a carrier if the line drops? For some reason my windows pc keeps losing the registered status for one reason or another.

 

[N_G]

Reregister

Hi,

Unfortunately there is not. The reregistration has to come from the client.

It would be a great feature to have, we will look into making a work around.

 

[Anonymous]

2 Stages of Implementation

• I guess if it was possible it should work that the server will continue to try to register with the carrier if possible. A flag with a timer to retry should be easy enough. It would be a matter of triggering the same function that is triggered when you press the okay button after setting up a VOIP line and Gateway.
  
  Subsequently have the client with the same setup would make that advantageous; that way someone doesn't miss important calls while working on a spreadsheet or standing at a whiteboard.

 

[N_G]

Configure re-registratino

Well you can configure more frequent registration in the phone or SIP software client, just as the IP PBX can be configured to re-register more frequently with the VOIP provider.

However it has to be configured at the client end.

 

[Anonymous]

HOWTO from a HOWDO

Thanks for the answer.

IP PBX can be configured to re-register more frequently with the VOIP provider

For those of you like me:

HOWTO Register Server More Frequently
1. Under the lines menu click on <Manage>
2. Click the hyperlink of the name of the Gateway you want to configure.
3. Change the "Time between registration attemps (in seconds)"

*Note: 3600 is 1 hour.

I changed mine to 300 so I am wondering what the downside is; otherwise, why not set it to 1 minute?

 

[archie]

Re: HOWTO from a HOWDO

I changed mine to 300 so I am wondering what the downside is; otherwise, why not set it to 1 minute?

The only downside is the increasing of network traffic. But for home or small office network - it's not noticeable at all.