Solved Block WAN requests is ON

Status
Not open for further replies.

Network Emad

Joined
Oct 27, 2017
Messages
33
Reaction score
3
hello

i got this alert on dashboard:

SIP Server/Call Manager ID: 12291
SIP request (REGISTER) from 20.1.1.1 was rejected. Reason: Block WAN requests is ON. Message: REGISTER sip:20.1.1.1 SIP/2.0 Via: SIP/2.0/UDP 20.1.1.1
 
Somebody from this address: 20.1.1.1 was trying to register on PBX. Most probably an attack. Normal to have such messages from time to time. Be sure all passwords you use, are strong enough.
 
  • Like
Reactions: Network Emad
ok

but i installed 3CX on 20.1.1.1 and i got this message from the same server !! do you mean that
 
Normally you should install the PBX on local address like 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16, as defined by RFC 1918.
The address 20.1.1.1 is a public IP address and if you use it as private one, the PBX would not function properly. The case above means the address will be blocked for 1800 sec (default security setting), as the PBX received registration attempt from itself. By default extensions are not allowed to register from public networks. You may have other configuration issues too for causing the above event.

Please review your settings and if necessary reinstall the PBX (you can't change local address of the PBX without reinstalling).
 
Last edited:
  • Like
Reactions: Network Emad
Normally you should install the PBX on local address like 10.0.0.0/8, 172.16.0.0/12 or 192.168.0.0/16, as defined by RFC 1918.
The address 20.1.1.1 is a public IP address and if you use it as private one, the PBX would not function properly. The case above means the address will be blocked for 1800 sec (default security setting), as the PBX received registration attempt from itself. By default extensions are not allowed to register from public networks. You may have other configuration issues too for causing the above event.

Please review your settings and if necessary reinstall the PBX (you can't change local address of the PBX without reinstalling).


thank you

i used 10.1.1.20 as default gateway instead of 20.1.1.20 and the message stop appearing.
 
Status
Not open for further replies.

Latest Posts

Forum statistics

Threads
111,884
Messages
589,542
Members
164,742
Latest member
Zain101