- Joined
- Jul 14, 2007
- Messages
- 3
- Reaction score
- 0
I can get the VOIP line to register but it won't stay registered for very long. When it is registered everything works fine, inbound and outbound but only to an extension. I am having issues with the DR hanging up after 15 seconds. Once the line dosconnects, the server never re-attempts to connect, must be done manually. The interval seems to be 25-30 seconds unless I am on a call then it disconnects when the call ends with the same "reason=Conflict" message.
Running v3.0.1928.0 on XP, P4 2GHz, 512MB, behind a Firewall/NAT, both are configured and when the line is connected it works fine inbound and outbound from an extension.
I have also tried to uninstall, reinstall, tried upgrading to v3.0.2328.0 but ran into other issues with DR not answering at all but still had the same "reason=Conflict" issue so I rolled back to 1928.
I have been searching the forum but cannot find any information on "reason=Conflict". Any help would be greatly apprecited.
Thanks,
Mark
I have tried deleting and recreating the VOIP line, and used the broadvoice template, all with the same results.20:03:15.765 ClientRegs:nFailure Registration of sip:[email protected] has failed; reason=Conflict
20:02:50.343 ClientRegs:nSuccess Registration of sip:[email protected] is successful
Running v3.0.1928.0 on XP, P4 2GHz, 512MB, behind a Firewall/NAT, both are configured and when the line is connected it works fine inbound and outbound from an extension.
I have also tried to uninstall, reinstall, tried upgrading to v3.0.2328.0 but ran into other issues with DR not answering at all but still had the same "reason=Conflict" issue so I rolled back to 1928.
I have been searching the forum but cannot find any information on "reason=Conflict". Any help would be greatly apprecited.
Thanks,
Mark