But for calls through fxs do not work

[pepe75]

With himself not to make work spa 3102
Somebody podria to help me with the configuration for Spain
the problem is that the calls by supplier voip if works, but for calls through fxs do not work


19:33:42.468 StratLink:nHangUp [CM104001] Call(116): Ext.104 hung up call; cause: BYE; from IP:192.168.1.10
19:31:19.182 CallLegImpl:nConnected [CM103001] Call(116): Created audio channel for Ln:10000@spa 3102 (192.168.1.1:16438) with Media Server (192.168.1.10:7468)
19:31:19.152 StratInOut:nConnected [CM104005] Call(116): Setup completed for call from Ext.104 to Ln:10000@spa 3102
19:31:19.152 CallLegImpl:nConnected [CM103001] Call(116): Created audio channel for Ext.104 (192.168.1.10:2409) with Media Server (192.168.1.10:7466)
19:31:19.132 CallConf:nProvisional [CM103003] Call(116): Ln:10000@spa 3102 is ringing
19:31:18.792 CallConf:nIncoming [CM103002] Call(116): Incoming call from 104 (Ext.104) to sip:[email protected]
19:31:14.545 ServRegs:nAdd [CM113002] Registered: Ext.104

 

[Mirzab]

I don't see any obvious reason for it not to work. Before I go through line by line maybe you could take a look at my screen prints here http://www.3cx.com/forums/categorie...general-1/linksys-spa-3102-with-3cx-3-1-2334/. Compare to yours but allow for differences between Canada & Spain with regards to line & ring.

 

[pepe75]

Thanks for your reply, finally everything ok
Co your help.
Greetings