Solved Cannot connect to 3CX management console (also)

[TLCtech]

I just spun up a 3cx server on my Raspberry Pi4 but I cannot get to the management console. Ive redone this install 3 separate times. All with the same issue. Once its done, it gives me 2 urls, and neither work. Ive also tried using the local ip:5015 to access and it wont either.

I started following the directions in this thread, but I cant connect via the local ip.
https://www.3cx.com/community/threads/cannot-connect-to-3cx-management-console.58579/

nslookup doesnt work. At all. It just gives me a > symbol. I have a static IP set for the pi.

• 3CX Version, not sure. I downloaded the latest one from wget
• Server OS, Raspbian GNU/Linux 10 (buster)
• Is the 3CX Server Hosted and where? Locally Hosted

I have not even gotten to these questions yet

• IP Phone Make/Model/Firmware
• Provisioning Method: Local / VPN / STUN / SBC
• Trunk Provider or Gateway Make/Model
• Has the Firewall Checker passed: YES / NO
• Are custom Phone Templates being used: YES / NO

Thanks in advance

 

[cobaltit]

Just confirming you followed these steps?

https://www.3cx.com/docs/installing-pbx-raspberry-pi/

When you say you can't get to the management console, is this AFTER doing the initial setup on 5015? After the setup is completed 5015 no longer works. It would either be :5000 or 80 (typically just no port) like http://192.168.x.x or http://10.x.x.x

 

[TLCtech]

I apologize. That wasn't clear. Yes, I got through the set up, and was given the two urls.

And I don't know why, but I think it had something to do with the ports. We went through and opened all the required ports and suddenly it worked inside and outside the network.

:shrug: