Can't Provision SBC

[bluelinkcloud]

I'm trying to follow the steps to provision SBC Connection, but in my 3CX Console --> Sip Trunks, I can't find a way to add SBC Connection.

Please help

 

[YiannisH_3CX]

Hello @bluelinkcloud

SBC provisioning is available in the latest SP2 which is currently in Beta. You need to upgrade to the Beta version to be have the option to provision an SBC, which is not recommended for production machines.
https://www.3cx.com/blog/releases/sbc-session-border-controller/

 

[Walter Santos]

Which version of 3CX are you using? In version 16, there is no need to add in the Trunk SIP tab.

 

[bluelinkcloud]

Which version of 3CX are you using? In version 16, there is no need to add in the Trunk SIP tab.

Thank you Walter, yest it's version 16..
so how I know that the SBC is correctly configured? any installation steps for V16?

 

[cobaltit]

So the Wayback Machine is down for maintenance right now but when it comes back up you can go to this link:

https://archive.org/web/

And then put in this URL:

https://www.3cx.com/docs/3cx-tunnel-session-border-controller/

And you should see the old instructions.

 

[Walter Santos]

Thank you Walter, yest it's version 16..
so how I know that the SBC is correctly configured? any installation steps for V16?

When you install the SBC on the hardware, you have to point the server that is with 3CX. When adding a phone will appear the option via sbc, then just choose.

 

[cobaltit]

So you will follow the instructions for installing the STABLE version of the SBC at the current link:

https://www.3cx.com/docs/3cx-tunnel-session-border-controller/

Then follow the steps starting at 'Step 3: Configure 3CX SBC' at the archive link below.

https://web.archive.org/web/2016112...om/docs/3cx-tunnel-session-border-controller/


It will NOT show up in the console.