- Joined
- Feb 25, 2009
- Messages
- 31
- Reaction score
- 0
Hi
I am looking for a little help or suggestions,
1/ Can anyone please tell me what is required from a device in order for it to register within 3CX ( other than username password etc ) as I am using a Cisco 2620XM, which if told it needs to register shows red and fails to work, but if told registration not required appears green and functions.
2/ I have a
Cisco 2620XM (MPC860P) processor (revision 4.1) with 98304K/32768K bytes of memo
ry.
Processor board ID FCZ092773CG
M860 processor: part number 5, mask 2
1 FastEthernet interface
1 ATM interface
2 Voice FXO interfaces
2 Voice FXS interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
I can make a call over PSTN okay, but an incoming call is answered and imediately ( 1ring) then dialtone for 10 secs then engaged tone and finally hangs up.
Copy of log entry
10:07:06.377 [CM503008]: Call(7): Call is terminated
10:06:21.814 Session 515 of leg C:7.1 is confirmed
10:06:21.533 [CM503007]: Call(7): Device joined: sip:*******@sip2.plus.net:5060
10:06:21.517 [CM503007]: Call(7): Device joined: sip:[email protected]:5060;transport=udp
10:06:21.517 [MS210001] C:7.2:Answer received. RTP connection[unsecure]: 194.165.60.134:13254(13255)
10:06:21.502 Remote SDP is set for legC:7.2
10:06:19.002 [MS210005] C:7.1:Answer provided. Connection(proxy mode):192.168.69.1:7018(7019)
10:06:19.002 [MS210001] C:7.2:Answer received. RTP connection[unsecure]: 194.165.60.134:13254(13255)
10:06:19.002 Remote SDP is set for legC:7.2
10:06:18.986 [CM505003]: Provider:[Plus Net] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:*******@80.229.218.96:5060]
10:06:18.986 [CM503002]: Call(7): Alerting sip:*******@sip2.plus.net:5060
10:06:17.127 [CM503025]: Call(7): Calling VoIPline:01553******@(Ln.10001@Plus Net)@[Dev:sip:*******@sip2.plus.net:5060]
10:06:17.127 [MS210004] C:7.2:Offer provided. Connection(proxy mode): 80.229.218.96:9006(9007)
10:06:17.095 [CM503004]: Call(7): Route 1: VoIPline:01553******@(Ln.10001@Plus Net)@[Dev:sip:*******@sip2.plus.net:5060]
10:06:17.080 [CM503010]: Making route(s) to <sip:01553******@192.168.69.1>
10:06:17.080 [MS210000] C:7.1:Offer received. RTP connection: 192.168.69.202:32184(32185)
10:06:17.080 Remote SDP is set for legC:7.1
10:06:17.080 [CM505001]: Ext.11: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, unable-no-sdp, no-recvonly] UserAgent: [Cisco-CP7940G/8.0] PBX contact: [sip:[email protected]:5060;transport=udp]
10:06:17.064 [CM503001]: Call(7): Incoming call from Ext.11 to <sip:01553******@192.168.69.1>
10:06:17.064 [CM500002]: Info on incoming INVITE:
INVITE sip:01553******@192.168.69.1 SIP/2.0
Via: SIP/2.0/UDP 192.168.69.202:5060;branch=z9hG4bK44095750
Max-Forwards: 70
Contact: <sip:[email protected]:5060;transport=udp>
To: <sip:01553******@192.168.69.1>
From: "11"<sip:[email protected]>;tag=0015629f94bc16234d8d445b-5149d6b4
Call-ID: [email protected]
CSeq: 102 INVITE
Expires: 180
Accept: application/sdp
Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, UPDATE
Date: Sun, 09 Aug 2009 09:08:37 GMT
Proxy-Authorization: Digest username="11",realm="3CXPhoneSystem",uri="sip:01553******@192.168.69.1",response="1be03608fe7bb106a82b74e77c0f92a5",nonce="414d535c008f228890:940d563e763b0e296002824309316bd1",algorithm=MD5
Supported: replaces, join, norefersub
User-Agent: Cisco-CP7940G/8.0
Content-Length: 0
Any help would be good
Thanks in advance
I am looking for a little help or suggestions,
1/ Can anyone please tell me what is required from a device in order for it to register within 3CX ( other than username password etc ) as I am using a Cisco 2620XM, which if told it needs to register shows red and fails to work, but if told registration not required appears green and functions.
2/ I have a
Cisco 2620XM (MPC860P) processor (revision 4.1) with 98304K/32768K bytes of memo
ry.
Processor board ID FCZ092773CG
M860 processor: part number 5, mask 2
1 FastEthernet interface
1 ATM interface
2 Voice FXO interfaces
2 Voice FXS interfaces
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
I can make a call over PSTN okay, but an incoming call is answered and imediately ( 1ring) then dialtone for 10 secs then engaged tone and finally hangs up.
Copy of log entry
10:07:06.377 [CM503008]: Call(7): Call is terminated
10:06:21.814 Session 515 of leg C:7.1 is confirmed
10:06:21.533 [CM503007]: Call(7): Device joined: sip:*******@sip2.plus.net:5060
10:06:21.517 [CM503007]: Call(7): Device joined: sip:[email protected]:5060;transport=udp
10:06:21.517 [MS210001] C:7.2:Answer received. RTP connection[unsecure]: 194.165.60.134:13254(13255)
10:06:21.502 Remote SDP is set for legC:7.2
10:06:19.002 [MS210005] C:7.1:Answer provided. Connection(proxy mode):192.168.69.1:7018(7019)
10:06:19.002 [MS210001] C:7.2:Answer received. RTP connection[unsecure]: 194.165.60.134:13254(13255)
10:06:19.002 Remote SDP is set for legC:7.2
10:06:18.986 [CM505003]: Provider:[Plus Net] Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [] PBX contact: [sip:*******@80.229.218.96:5060]
10:06:18.986 [CM503002]: Call(7): Alerting sip:*******@sip2.plus.net:5060
10:06:17.127 [CM503025]: Call(7): Calling VoIPline:01553******@(Ln.10001@Plus Net)@[Dev:sip:*******@sip2.plus.net:5060]
10:06:17.127 [MS210004] C:7.2:Offer provided. Connection(proxy mode): 80.229.218.96:9006(9007)
10:06:17.095 [CM503004]: Call(7): Route 1: VoIPline:01553******@(Ln.10001@Plus Net)@[Dev:sip:*******@sip2.plus.net:5060]
10:06:17.080 [CM503010]: Making route(s) to <sip:01553******@192.168.69.1>
10:06:17.080 [MS210000] C:7.1:Offer received. RTP connection: 192.168.69.202:32184(32185)
10:06:17.080 Remote SDP is set for legC:7.1
10:06:17.080 [CM505001]: Ext.11: Device info: Device Not Identified: User Agent not matched; Capabilities:[reinvite, replaces, unable-no-sdp, no-recvonly] UserAgent: [Cisco-CP7940G/8.0] PBX contact: [sip:[email protected]:5060;transport=udp]
10:06:17.064 [CM503001]: Call(7): Incoming call from Ext.11 to <sip:01553******@192.168.69.1>
10:06:17.064 [CM500002]: Info on incoming INVITE:
INVITE sip:01553******@192.168.69.1 SIP/2.0
Via: SIP/2.0/UDP 192.168.69.202:5060;branch=z9hG4bK44095750
Max-Forwards: 70
Contact: <sip:[email protected]:5060;transport=udp>
To: <sip:01553******@192.168.69.1>
From: "11"<sip:[email protected]>;tag=0015629f94bc16234d8d445b-5149d6b4
Call-ID: [email protected]
CSeq: 102 INVITE
Expires: 180
Accept: application/sdp
Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER, UPDATE
Date: Sun, 09 Aug 2009 09:08:37 GMT
Proxy-Authorization: Digest username="11",realm="3CXPhoneSystem",uri="sip:01553******@192.168.69.1",response="1be03608fe7bb106a82b74e77c0f92a5",nonce="414d535c008f228890:940d563e763b0e296002824309316bd1",algorithm=MD5
Supported: replaces, join, norefersub
User-Agent: Cisco-CP7940G/8.0
Content-Length: 0
Any help would be good
Thanks in advance