cisco 7940 how to add ctu 24 ring tone?

[aftermarket]

hi

finally got the phone booting from tftp however when i go to ring tones there is only the option for two ring tones. i have tried adding the ringtone.dat file but its not worked?

 

[aarevalo]

How are you tring to do this? via tftp? I had the CTU .cpm ringtone some time ago but I lost them. the way you have to do it is doing an tftp server and adding the ringtone names to the ringtone.dat file (the ringtone.dat and the ringtone should all be in the same place) restart your phone, point it to the tftp server and voila.
Any question let me know

 

[aftermarket]

hello

thanks for that i've done it now. do you know how to configure the services/messages and directories buttons on these phones?

thanks

 

[aarevalo]

I don't believe this is posible with 3CX (can someone confirm that please?) Cisco has some application that you have to download and it will basically setup the website where you would point the phone for the extra services and directores that you would want)

 

[home]

Hi
The Directories is possible, I have been experimenting for a couple of months now, I am now looking at the services but no luck yet.
I downloaded Fastream IQ Web/FTP Server and setup, you will also need a copy of Edxor (for writing xml files ), then you edit the SIPDefault file in your TFTP server, pointing the Directory at the Web Server.
The xml format you need for the directory are, this need to be written using Edxor,
<CiscoIPPhoneDirectory>
<Title> </Title>
<Prompt> </Prompt>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>
<DirectoryEntry>
<Name> </Name>
<Number> </Number>
</DirectoryEntry>

This gives you a 32 entry directory. When you press the Directories button, you should now have a 5th option "External Directory",
press and there you go.

 

[aftermarket]

hi thanks for that and that will work even though i've converted it to sip? also will the phone pick up numbers that are coming in and assign them a name if its in the phone book?


thanks

 

[home]

Hi
It works with SIP, I have over a dozen 7940G's working, if you enter the correct value for "Messages" in your SIPDefault you can go straight to voicemail by pressing the Message button, as I do not have caller ID at home I can cannot say weather it will recognize a number and display the directory entry.

 

[aftermarket]

what the correct value for the message button to go through to vocie mail sorry i'm new to all this!!

thank you

 

[discovery1]

Same as the default 3CX value - usually 999

 

[aftermarket]

ok i have changed this to 121 what would be the code that i would put in the sipdefault file? sorry for asking question on question new to all this and it been one long headache thats slowly getting better!

 

[home]

Hi
Assuming you have entered "121" in the Message slot in your SIPDefault.cnf file and also in the Voice Mail Menu Extion Number in 3CX, all you need do now is press the Envelope button on your phone and enter your pin when prompted, also red light should show on handset when messages have been left.
Hope this helps.

 

[aftermarket]

theres no message code to add that into in my sipdefault. do you know what it would be?

thanks

 

[home]

Hi
Here's a copy of my template,

image_version: "P0S3-07-4-00";
proxy1_address: "10.1.18.100";
proxy2_address: "";
proxy3_address: "";
proxy4_address: "";
proxy5_address: "";
proxy6_address: "";
proxy1_port: "5060";
proxy2_port: "";
proxy3_port: "";
proxy4_port: "";
proxy5_port: "";
proxy6_port: "";
proxy_register: "1";
time_zone: "EST";
dst_auto_adjust: "1";
dst_start_month: "April";
dst_start_day: "";
dst_start_day_of_week: "Sun";
dst_start_week_of_month: "1";
dst_start_time: "02:00";
dst_stop_month: "October";
dst_stop_day: "";
dst_stop_day_of_week: "Sun";
dst_stop_week_of_month: "8";
dst_stop_time: "02:00";
date_format: "M/D/Y";
time_format_24hr: "0";
local_cfwd_enable: "1";
directory_url: "";
messages_uri: "2000";
services_url: "";
logo_url: "";
stutter_msg_waiting: "0";
sync: "0000200155330856";
telnet_level: "1";
autocomplete: "1";
call_stats: "0";
Domain_Name: "";
dtmf_avt_payload: "101";
dtmf_db_level: "3";
dtmf_inband: "1";
dtmf_outofband: "avt";
dyn_dns_addr_1: "";
dyn_dns_addr_2: "";
dyn_tftp_addr: "";
end_media_port: "32766";
http_proxy_addr: "";
http_proxy_port: "80";
nat_address: "";
nat_enable: "0";
nat_received_processing: "0";
network_media_type: "Auto";
network_port2_type: "Hub/Switch";
outbound_proxy: "";
outbound_proxy_port: "5060";
proxy_backup: "";
proxy_backup_port: "5060";
proxy_emergency: "";
proxy_emergency_port: "5060";
remote_party_id: "0";
sip_invite_retx: "6";
sip_retx: "10";
sntp_mode: "directedbroadcast";
sntp_server: "0.0.0.0";
start_media_port: "16384";
tftp_cfg_dir: "";
timer_invite_expires: "180";
timer_register_delta: "5";
timer_register_expires: "3600";
timer_t1: "500";
timer_t2: "4000";
tos_media: "5";
voip_control_port: "5060";

 

[Discovery Technology]

It's in the SIP{MAC}.cnf file...

# Voicemail setup
messages_uri: 121